Good soldering station?

Question

Do it yourself

Under the pressure of frequent articles about soldering, I wanted to change my soldering iron to something more worthwhile, namely a soldering station.
Tell me a cheap, Chinese one, preferably with a hairdryer or some other gadgets, well, or just reliable, good
. Thank you in advance!

Answer 1

luke look.
I bought shop.siriust.ru/product_info.php/products_id/9322 a year ago, I am completely satisfied. The only downside is that it hums when turned off. solved by a toggle switch on the surge protector.

Answer 2

cheap+chinese+gadgets = link ;)

Answer 3

I also have LUKEY, only 702. Satisfied.

Answer 4

It's funny. but I also have a Lukey 852D + FAN. Gorgeous thing. In terms of "price-quality" - the best option.
Heats up quickly and cools down fairly quickly. No problems so far, highly recommend!
The temperature of the hair dryer / soldering iron up to 480 degrees. The minimum, I don’t remember exactly, but like 120, or 150.
The kit includes the station itself, a hairdryer, a soldering iron, a soldering iron stand, a small piece of cellulose to clean the tip, and 2 or 3 nozzles for concentrating the air flow of a hairdryer. The hair dryer is non-removable, it takes air from the very handle of the hair dryer, so the hand will get a little tired from rattling, but this is when working with a hair dryer for a long time. The air pressure is adjustable on the panel.
The soldering iron is removable and can be replaced. It seems to cost about 400 rubles.
In the off state, the rumble of the transformer is really audible, it seems. So it's better to turn it off through the surge protector. The main thing is that the company is well-known.
Took for 2300 (like: D)

Answer 5

habrahabr.ru/post/89280/

Answer 6

I have lukey 702 at home, and lukey 868 in the laboratory. One differs from the other only in the heating element. The 702 has a Chinese one and, therefore, it is a little cheaper, while the 868 has a branded high-quality heater. Both work great. The hair dryer is also good, but it's not bad that it does not disconnect from the station. I haven’t tried the hair dryer nozzles, but the tips are suitable and the choice is good, of any size and shape, with and without a microwave.

Answer 7

For a long time successfully used Termit P36K . Simple and convenient, but works from 36VAC i.e. need a step-down tr-r 220/36 (was).
A year ago I switched to Weller WD 1000 . This pleasure is much more expensive (all of the above), but:
- a large selection of tips (long-playing),
- digital indication and 3 fixed temperatures programmed on the keys,
- sleep timers (temp. drops to 150C) and shutdowns (power is removed from the soldering iron) - Just what the aspiring lover needs!

Answer 8

I want to buy:
1) Soldering station up to 11000 2 ) IR soldering station up
to 11000 ). Actually questions: 1) Do you really need a gun, or can you do without it? (I know about the fact that everything can be soldered by EPSN-25, but I'm not talking about that) 2) Should I take cheap ones, or should I fork out and buy ERSA/Quick? (there is just one base with a soldering iron costs from 15,000) 3) Should I take everything in one block, or should I take a soldering iron and a hair dryer separately?
I looked at a lot of materials about the pop lukey 702. All the same, I would like to buy something that does not have to be modified, soldered. To make it work well right out of the box.
Of course, you can buy Ersa for 25,000. But the question is, is it worth it? I am not a service center, and I do not plan to earn it in the near future. Only personal use, let's say, "amateur radio".