Answer the question
In order to leave comments, you need to log in
Empty incoming exactly every 15 minutes on TDM400P
I've run out of ideas, and there's a beam in my eye.
The incoming analog signal comes from the landlord's PBX... like Avaya is old there... CallerID won't even send.
Normal incoming outgoing runs, all the way through, but every 15 minutes an incomprehensible incoming one that they never have time to answer.
in console
-- Starting simple switch on 'DAHDI/1-1'
-- Executing [[email protected]_trunk_1:1] ExecIf("DAHDI/1-1", "1?Set(CALLERPRES()=unavailable)") in new stack
-- Executing [[email protected]_trunk_1:2] ExecIf("DAHDI/1-1", "1?Set(CALLERID(all)=unknown <------->)") in new stack
-- Executing [[email protected]_trunk_1:3] Goto("DAHDI/1-1", "ringroups-custom-1,s,1") in new stack
-- Goto (ringroups-custom-1,s,1)
-- Executing [[email protected]:1] NoOp("DAHDI/1-1", "testgroup") in new stack
-- Executing [[email protected]:2] Dial("DAHDI/1-1", "DAHDI/3,5,i") in new stack
-- Called DAHDI/3
-- DAHDI/3-1 is ringing
-- DAHDI/3-1 is ringing
-- DAHDI/3-1 answered DAHDI/1-1
-- Native bridging DAHDI/1-1 and DAHDI/3-1
-- Hanging up on 'DAHDI/3-1'
-- Hungup 'DAHDI/3-1'
[trunk_1]
trunkname = port1
group = 1
busydetect = yes
busycount = 4
busypattern = 500,500
ringtimeout = 8000
answeronpolarityswitch = no
hanguponpolarityswitch = no
callprogress = no
progzone = us
usecallerid = yes
cidstart = ring
pulsedial = no
cidsignalling = dtmf
relaxdtmf = yes
hidecalleridname = no
flash = 750
rxflash = 1250
callerid = asreceived
dahdichan = 1
context = DID_trunk_1
hasexten = no
hasiax = no
hassip = no
registeriax = no
registersip = no
trunkstyle = analog
disallow = all
allow = all
Answer the question
In order to leave comments, you need to log in
Didn't find what you were looking for?
Ask your questionAsk a Question
731 491 924 answers to any question