V
V
Vitaly2018-10-14 18:12:35
ubuntu
Vitaly, 2018-10-14 18:12:35

Does mouse through time work on Ubuntu 18.04.1?

Good day. Faced such a problem that the Logitech M185 mouse works only on one USB, and then every other time, it happens that you have to remove the receiver from the USB 2-3 times to make the mouse come to life. It does not work on other ports, although other devices and flash drives, USB hard drives everything works fine. I can’t sin on the mouse itself. on the laptop there are two systems windows 10 and ubuntu 18.04.1 as a result on windows I did not encounter such a problem.
If I insert the mouse into the port in which it sometimes works and run lsusb , I get

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 006: ID 0cf3:e005 Atheros Communications, Inc. 
Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 002: ID 0c45:6a05 Microdia 
Bus 001 Device 013: ID 046d:c534 Logitech, Inc. Unifying Receiver
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

if you insert the receiver into other ports, then I get
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 006: ID 0cf3:e005 Atheros Communications, Inc. 
Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 002: ID 0c45:6a05 Microdia 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

I connected an ordinary cheap mouse and it works without problems
Bus 002 Device 002: ID 0bc2:61b3 Seagate RSS LLC 
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 007: ID 0cf3:e005 Atheros Communications, Inc. 
Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 002: ID 0c45:6a05 Microdia 
Bus 001 Device 019: ID 145f:01d2 Trust 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Answer the question

In order to leave comments, you need to log in

1 answer(s)
V
Vitaliy, 2018-11-02
@kat-vetal

The problem turned out to be banal simple, dismantled the receiver and cleaned the contacts on the receiver

Didn't find what you were looking for?

Ask your question

Ask a Question

731 491 924 answers to any question