Answer the question
In order to leave comments, you need to log in
Chinese analogue of Dualshock 3 to PC (windows)?
Good day to all. I ordered two dualshock3 from Aliexpress, everything came all right. I started connecting to the PC, I just didn’t want to do this, I set both motionjoy and scp_driver and set it up this way and that .. the result is always the same, it works via USB, not via bluetoch, the bluetooth whistle is also completely suitable, in motionjoy there are practically all the jackdaws, and to besides, there are 2 of them, and each has the same problems (I tried 4 whistles in total). It seems to me that the trouble is with the MAC address, I installed libusb and SixaxisPairTool and when I register mac and then disconnect from usb, and then connect it again, the address is reset to 00:00:00:00:00:00 the same with the rest of the drivers .. moreover, this is not the mac address of the joystick, but the parameter that is responsible for the remote connection (in general, there should be a poppy usb whistle) ... I have been suffering for almost a week, I don’t suffer,
Answer the question
In order to leave comments, you need to log in
familiar case. After some updates of MotioninJoy (I don’t remember the version of the program anymore and I can’t open the site from my bookmarks), the gamepads stopped working via bluetooth, (on Windows 8 - I couldn’t set up bluetooth even with the old version of the program)
But about SCP it is necessary at your leisure to try on Win10.
If you have Windows 7, (preferably on a clean system) you can try to look for the old version 0.6 or 0.5
Didn't find what you were looking for?
Ask your questionAsk a Question
731 491 924 answers to any question