Bought a poor mother, what to do?

Question

motherboards

I bought Esonic h61FEL-U motherboard for i3-2120 in dns. Stupidly need a working computer for the office. What is the problem: the CPU cooler blows 100% from the moment it is turned on until it is turned off. The bios is so elementary that there is nothing at all. Since the company is Indian, the site was abandoned in 2014 - no bios updates, nothing at all. The only program to control the CPU cooler - Speedfan - safely goes to sleep in the blue screen.
GG
Mother bought today, but already installed, tore off all labels and stickers. Will it be accepted back to the dns under the pretext of "there is no cooler adjustment at all"?
I waited until the last, that after installing all the firewood, the mother would pick up the percentage and blow depending on the load, but, of course, not (Chinese rubbish. That's it, this is the last time the mother was not Asus.

Answer 1

There is a proposal to put a resistor on the cooler, reducing the speed in such a clumsy way.

Answer 2

Well, how to "what to do" - to learn for yourself a lesson that kroilovo leads to bad luck. And don't do it again.