Answer the question
In order to leave comments, you need to log in
Adaptec ASR-6405T write cache not working?
I installed a controller with an AFM-600 module in my home server. The server is running Proxmox 6.2.
Enabled write caching with the arcconf SETCACHE 1 LOGICALDRIVE 0 wbb command . Due to a UPS glitch, the server shut down abnormally several times, and each time the data on the disk is broken (MySQL InnoDB tables, LVM get into an error, not to mention errors on EXT4). What is it, a non-working cache, or have I configured something wrong?
arrconf getconfig 1 output :
Controllers found: 1
----------------------------------------------------------------------
Controller information
----------------------------------------------------------------------
Controller Status : Optimal
Channel description : SAS/SATA
Controller Model : Adaptec 6405T
Controller Serial Number : 1A5111DBD6E
Physical Slot : 16
Temperature : 58 C/ 136 F (Normal)
Installed memory : 512 MB
Copyback : Disabled
Background consistency check : Enabled
Automatic Failover : Enabled
Global task priority : High
Performance Mode : Default/Dynamic
Stayawake period : Disabled
Spinup limit internal drives : 0
Spinup limit external drives : 0
Defunct disk drive count : 0
Logical devices/Failed/Degraded : 1/0/0
NCQ status : Enabled
Statistics data collection mode : Enabled
--------------------------------------------------------
Controller Version Information
--------------------------------------------------------
BIOS : 5.3-0 (19204)
Firmware : 5.3-0 (19204)
Driver : 1.2-1 (50877)
Boot Flash : 0.0-0 (19204)
--------------------------------------------------------
Controller ZMM Information
--------------------------------------------------------
Status : ZMM Optimal
----------------------------------------------------------------------
Logical device information
----------------------------------------------------------------------
Logical device number 0
Logical device name : arr1
RAID level : 1
Status of logical device : Optimal
Size : 1904630 MB
Read-cache mode : Enabled
Write-cache mode : Enabled (write-back)
Write-cache setting : Enabled (write-back) when protected by battery/ZMM
Partitioned : Yes
Protected by Hot-Spare : No
Bootable : Yes
Failed stripes : No
Power settings : Disabled
--------------------------------------------------------
Logical device segment information
--------------------------------------------------------
Segment 0 : Present (Controller:1,Connector:0,Device:0) WD-WMC300808700
Segment 1 : Present (Controller:1,Connector:0,Device:1) MK0273YGJ93BVC
----------------------------------------------------------------------
Physical Device information
----------------------------------------------------------------------
Device #0
Device is a Hard drive
State : Online
Supported : Yes
Transfer Speed : SATA 6.0 Gb/s
Reported Channel,Device(T:L) : 0,0(0:0)
Reported Location : Connector 0, Device 0
Vendor : ATA
Model : WDC WD20EFRX-68A
Firmware : 80.00A80
Serial number : WD-WMC300808700
Size : 1907729 MB
Write Cache : Disabled (write-through)
FRU : None
S.M.A.R.T. : No
S.M.A.R.T. warnings : 0
Power State : Full rpm
Supported Power States : Full rpm,Powered off
NCQ status : Enabled
Device #1
Device is a Hard drive
State : Online
Supported : Yes
Transfer Speed : SATA 6.0 Gb/s
Reported Channel,Device(T:L) : 0,1(1:0)
Reported Location : Connector 0, Device 1
Vendor : ATA
Model : Hitachi HUA72302
Firmware : MK7OAA10
Serial number : MK0273YGJ93BVC
Size : 1907728 MB
Write Cache : Disabled (write-through)
FRU : None
S.M.A.R.T. : No
S.M.A.R.T. warnings : 0
Power State : Full rpm
Supported Power States : Full rpm,Powered off,Reduced rpm
NCQ status : Enabled
Device #2
Device is a Hard drive
State : Online (JBOD)
Supported : Yes
Transfer Speed : SATA 6.0 Gb/s
Reported Channel,Device(T:L) : 0,3(3:0)
Reported Location : Connector 0, Device 3
Vendor : ATA
Model : Hitachi HDS72302
Firmware : MN6OAA10
Serial number : MN1270FA11896D
Size : 1907729 MB
Write Cache : Disabled (write-through)
FRU : None
S.M.A.R.T. : No
S.M.A.R.T. warnings : 0
Power State : Full rpm
Supported Power States : Full rpm,Powered off,Reduced rpm
NCQ status : Enabled
Command completed successfully.
Answer the question
In order to leave comments, you need to log in
Didn't find what you were looking for?
Ask your questionAsk a Question
731 491 924 answers to any question