Accessories for the computer. Help me choose

Question

Iron

I decided to update my system unit.
In this regard, I sketched out an approximate list of components for the new system unit:

Socket 1150 GigaByte GA-Z87X-
UD4H motherboard / Processor Socket 1150 Core i5 4670K

3.4 GHz (BX80646I54670K) Box -l3-6-cb5cb/p166636/ DDR III memory module 4096 Mb x 2pcs 2133 Mhz PC-17000 Kingston (KHX21C11T3K2/ 8X ) 2x4gb-xmp-beast-87ac2/p142108/ or


Memory module DDR III 4096 Mb x 2pcs 1600 Mhz PC-12800 Kingston (KHX16C9T3K2/8X)
More details: www.sokol.ua/modul-pamyati-kingston-khx16c9t3k2-8x-99ede/p141672/

SSD-drive 2.5" SATA III 120Gb Silicon Power V60 (SP120GBSS3V60S25)
Details: www.sokol.ua/ssd--sata-iii-120-gb-silicon-power-v60-sp120gbss3v60s25/p109507/

CoolerMaster CM Force 500 Case Without PSU (FOR-500-KKN1) Black
More : www.sokol.ua/korpus-coolermaster-cm-force-500-bez-bp-for-500-kkn1-black-f0f19/p168468/

Power supply 550W CoolerMaster GX 550W (RS550-ACAAD3-EU)
More details: www. sokol.ua/cooler-master-gx-550w-rs550-acaad3-eu/p88884/

1. I decided to try the integrated video instead of a separate video card. I'm not a gamer, I think for work + sometimes photoshop should be enough.
2. Interested in which RAM is better to take with a frequency of 2133 Mhz or 1600 Mhz? What is the fundamental difference and what can be lost by reducing the frequency?
3. There are vague doubts that I went too far with the power supply. Or is 550W not so much and you shouldn't take less?
4. Just wondering how compatible the selected hardware will be?

Answer 1

1. I support.
3. It can be less, without HDD and video, about 400 "honest" W is enough, but in general it is better to leave a margin for the future.
4. I don’t see any special problems
From myself, I would take a slightly different SSD, but in general OK

Answer 2

Item #2 remained unanswered:
if you plan to use integrated graphics, I still advise you to take 2133 MHz, if discrete, then you will most likely not notice any tangible differences in the tests except for parrots.
I do not recommend taking a PSU less, otherwise if you want to add something, you will have to change it, in general, the configuration can be.

Answer 3

Just now I looked at the case - FU! pelvis pelvis epicho late 90s!
In general, the store is very bad with cases - either Chinese basins made of half-millimeter tin, or expensive freak monsters (and also far from 0.8 mm steel ...).
Take at least this one www.sokol.ua/korpus-zalman-z5-plus-e2e92/p143283/

Answer 4

I'm sorry, I didn't reply there.

Answer 5

Invest in a good case and you won't spend twice in the future.
a) take a case in which the PSU is placed below, it will feel more comfortable there, noise will decrease, the service life will last
b) a case in which there is a lot of space - strength, normal air circulation is very important, it is easier to assemble and modify the configuration, easier to clean from dust.
c) be sure to take a case in which there are fan seats for blowing in front, blowing out behind - opposite the processor, above and on the side of the grill, in such a case you can assemble an almost silent system. you don’t need to poke fans everywhere, 2x120 at 600-700 rpm. for blowing and blowing will be enough. For example this
You can choose the appropriate PSU, for example, from the Chiftek aps-550s, it has a wide range of input voltages in case of small subsidence in the mains (if there is no ups) + fan rotation control, in such a case it should work almost silently.
As for the SSD, I would advise you to take a closer look at the manufacturer Plextor, many praise it, I already try it myself, so far only positive impressions.

Answer 6

In principle, a PSU with an honest 430W for this configuration is enough to head even with overclocking of the processor, the manufacturer is elite - you can safely take it, although in the case of an additional installation of a good video card, it will be back to back ... keep in mind, you should not torment the PSU, at the end it can pull along the floor of the system unit, it is better to have 50-100 watts in stock.
At the expense of SSD, Silicon Power sv Plextor, not a big difference in price matters, before buying I advise you to read reviews and reviews on the forums, even the younger models from the new lines do not lose in speed, SP on the SF controller which has flaws when the disk is full (loses in speed), firmware manufacturers are in no hurry to update, the manufacturing process is 22nm versus 19nm, in general, there is something to think about. But as they say, to replenish statistics, you can take SP, the manufacturer still does not mark time.