Why is the whole network not visible through l2tp mikrotik?

Question

VPN

I set up an l2tp tunnel through the provider's network, the routers see each other, you can connect to the router both via the web and via winbox at 192,168,11,1, but you can't reach 192,168,11,2.
In what there can be a problem?
Server settings:
Firewall settings:
>ip>firewall>+
>>General
Chain: input
Protokol: 17(udp)
Dst.port: 1701
>>Action
Action: accept
Raise rule up
Nat:
>ip>firewall>nat>+
>> General: srcnat
Out interface: all ppp
>>Action: masquerade
Routes:
>IP>Routes+
Dst Address: 192.168.11.0/24
Gateway: 10.50.0.11
Distance: 1
Pref.Source: 10.50.0.10
Client settings:
Add static route:
>IP>Routes+
Dst.adres: 192.168.10.0/24
Gateway: 10.50.0.10
Pref.source: 10.50.0.11
Firewall settings:
>ip>firewall>nat tab> +
>>General
Chain: srcnat
Out interface: l2tp-client
>>Action
Action: masquerade

Answer 1

Ideally, you need to look at the export of the conf, perhaps you have something that prohibits something higher than it allows.
+ for l2tp ports 1701,4500,500
+ for ipsec protocols 50 and 51
Otherwise, it seems to be correct.
In general, if there is static everywhere, take a look at EoIP or IPIP + ipsec

Answer 2

Maybe the firewall interferes with 11.2?