Why does the screen go blank after installing drivers?

Question

Windows

After installing the drivers, the screen goes blank, while the computer continues to work. Through TeamViewer you can see the picture. There is no monitor in device manager. Disconnecting and connecting the monitor does not help, rebooting the PC too. In safe mode, everything works and if you remove the driver, then everything works too. It is not an option to work without drivers because the necessary programs do not start.
Problems occur on Windows 10 Pro and 11 Pro, I did not check on others.
Why is this happening and how to fix it?

Motherboard: Asus tuf gaming b450-plus II (last bios)
Processor: Ryzen 5 5600g I
don't have a video card, I use the built-in from the processor.
PSU 500w I think it should be enough for the eyes
All the components of the new
Windows 11 Pro are clean, just installed.
All drivers for the motherboard are also installed

. I rummaged through a bunch of forums and watched a bunch of videos, but the problem could not be solved.

Answer 1

I solved the problem. As it turned out, the whole thing was in the BIOS setup, which I forgot about.
Changed the graphics device from PCI to IGFX in the BIOS settings and it worked