Why does the monitor on ips without flicker hurt my eyes?

Question

Monitors

Monitor - 23.8" ViewSonic VA2419SH
1920 x 1080
IPS Sensor Response
Time: 5ms (GTG) Hdmi
Connected
Display Brightness 250cd
/m²
Display Contrast
Rated: 1000:1
Dynamic: 50000000: 1
Refresh Rate
60Hz
Flicker Free Monitor - Flicker -Free
Why are my eyes red and sore? Factory settings, only brightness and contrast are lowered, video card settings are reset, used to be 23 "Samsung on a tn matrix with 1920x1080 flickering, 2 ms response

Answer 1

Because it is a "vyrviglazny" monitor.
I think this is affected by the radiation source and its spectrum, although other parameters also affect but to a lesser extent. If you look at welding, your eyes will also hurt - some LEDs have a similar effect.

Answer 2

Your eyes dry, your eyes hold focus, you get conjunctivitis from dust.

Answer 3

Try Flux.

Answer 4

I had a similar problem, but with NEC. It was connected via an adapter to VGA at 1920x1080. After a couple of hours of work, incomprehensible discomfort at work began and increased over time. By the end of the day, my head started to hurt. In general, I could not understand what was the matter - the picture is excellent !? After three days, I generally drooped - the effect of fatigue accumulated and in the morning it was already impossible to look at the monitor. It's all about the sweep frequency. When I changed the cable to DisplayPort the problem went away. The monitor still works great even though it is 7 years old. Pay attention to the cable. Is there an adapter in the connection bundle. Your monitor costs 9000 rubles, stop sitting at it if you do not solve the problem - your eyes are more expensive!

Answer 5

ips is not an indicator at all, the
least of all my eyes hurt from good tft matrices

Answer 6

I bought myself a monitor, surprisingly the same model, my eyes began to hurt. How did you solve this problem?