What is wrong with Mikrotik and Cisco settings?

Question

Computer networks

Is there Cisco WS-C3750-48poe and Mikrotik RB 951 and the task is to raise the central DHCP server and NAT on Mikrotik? and leave routing on Cisco. Mikrotik with a cat is friends through the trunk (vlan2) see each other. Incoming from the provider to Cisco (via transit to Mikrotik, a vlan with a real IP was forwarded), On Mikrotik, DHCP (10.20.10.0/24) NAT was raised (masquerade to a vlan with a white IP) and a subnet for one vlan was created (for now). The cat is configured with a dhtsp relay on Mikrotik, the problem is that Mikrotik stubbornly does not want to distribute addresses, the address pool has been created, requests from the cat are visible, but there is no response from Mikrotik, what could be the problem, poke your finger
Cisco settings

version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname R1
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
clock timezone Europe/Kiev 3
switch 1 provision ws-c3750-48p
system mtu routing 1500
ip subnet-zero
ip routing
no ip domain-lookup
ip domain-name R1.to
ip name-server 8.8.8.8
ip dhcp smart-relay
ip dhcp relay information option
ip dhcp relay information policy keep
no ip dhcp relay information check
ip dhcp relay information trust-all
!
!
ip dhcp-server 10.20.10.2
!
!
crypto pki trustpoint TP-self-signed-1661953024
 enrollment selfsigned
 subject-name cn=IOS-Self-Signed-Certificate-1661953024
 revocation-check none
 rsakeypair TP-self-signed-1661953024
!
!

!
port-channel load-balance src-dst-ip
!
!
!
spanning-tree mode pvst
spanning-tree loopguard default
spanning-tree extend system-id
no spanning-tree vlan 5-6,8
!
vlan internal allocation policy ascending
!
!
!
!
interface Port-channel1
 description Mikrotik-NAT
 switchport trunk encapsulation dot1q
 switchport mode trunk
 switchport nonegotiate
 ip dhcp relay information trusted
 spanning-tree bpdufilter enable
 ip dhcp snooping trust
!
interface FastEthernet1/0/1
 switchport access vlan 7
 switchport mode access
 switchport priority extend trust
 switchport voice detect cisco-phone full-duplex
 mls qos trust cos
 spanning-tree portfast
!
interface FastEthernet1/0/2
 switchport access vlan 7
 switchport mode access
 switchport priority extend trust
 switchport voice detect cisco-phone full-duplex
 mls qos trust cos
 spanning-tree portfast
!
interface FastEthernet1/0/3
 switchport access vlan 7
 switchport mode access
 switchport priority extend trust
 switchport voice detect cisco-phone full-duplex
 mls qos trust cos
 spanning-tree portfast
!
interface FastEthernet1/0/4
 switchport access vlan 7
 switchport mode access
 switchport priority extend trust
 switchport voice detect cisco-phone full-duplex
 mls qos trust cos
 spanning-tree portfast
!         
interface FastEthernet1/0/5
 switchport access vlan 7
 switchport mode access
 switchport priority extend trust
 switchport voice detect cisco-phone full-duplex
 mls qos trust cos
 spanning-tree portfast
!
interface FastEthernet1/0/6
 switchport access vlan 7
 switchport mode access
 switchport priority extend trust
 switchport voice detect cisco-phone full-duplex
 mls qos trust cos
 spanning-tree portfast
!
interface FastEthernet1/0/7
 switchport access vlan 7
 switchport mode access
 switchport priority extend trust
 switchport voice detect cisco-phone full-duplex
 mls qos trust cos
 spanning-tree portfast
!
interface FastEthernet1/0/8
 switchport access vlan 7
 switchport mode access
 switchport priority extend trust
 switchport voice detect cisco-phone full-duplex
 mls qos trust cos
 spanning-tree portfast
!
interface FastEthernet1/0/9
 switchport access vlan 7
 switchport mode access
 switchport priority extend trust
 switchport voice detect cisco-phone full-duplex
 mls qos trust cos
 spanning-tree portfast
!
interface FastEthernet1/0/44
 power inline never
 switchport trunk encapsulation dot1q
 switchport mode trunk
 switchport nonegotiate
 channel-protocol lacp
 channel-group 1 mode active
 ip dhcp snooping trust
!
interface FastEthernet1/0/45
 power inline never
 switchport trunk encapsulation dot1q
 switchport mode trunk
 switchport nonegotiate
 no cdp enable
 channel-protocol lacp
 channel-group 1 mode active
 ip dhcp snooping trust
!
interface FastEthernet1/0/46
 power inline never
 switchport trunk encapsulation dot1q
 switchport mode trunk
 switchport nonegotiate
 no cdp enable
 channel-protocol lacp
 channel-group 1 mode active
 ip dhcp snooping trust
!
interface FastEthernet1/0/47
 power inline never
 switchport trunk encapsulation dot1q
 switchport mode trunk
 switchport nonegotiate
 no cdp enable
 channel-protocol lacp
 channel-group 1 mode active
 ip dhcp snooping trust
!
interface FastEthernet1/0/48
 power inline never
 switchport trunk encapsulation dot1q
 switchport trunk native vlan 3
 switchport trunk allowed vlan 3,8
 switchport mode trunk
!
interface GigabitEthernet1/0/1
!
interface GigabitEthernet1/0/2
!
interface GigabitEthernet1/0/3
!
interface GigabitEthernet1/0/4
!
interface Vlan1
 no ip address
 shutdown
 spanning-tree portfast
!
interface Vlan2
 ip dhcp relay information trusted
 ip address 10.20.10.1 255.255.255.0
 ip helper-address 10.20.10.2
!
interface Vlan3
 ip address 172.30.28.5 255.255.255.0
!
interface Vlan7
 description Voice
 ip address 172.16.0.1 255.255.255.0
 ip helper-address 10.20.10.2
!
ip classless
ip route 0.0.0.0 0.0.0.0 10.20.10.2
ip route 172.30.0.0 255.255.0.0 172.30.28.1
no ip http server
ip http secure-server
!
!
!
control-plane
!
!
line con 0
line vty 0 4
 password 7 0500112E0D44542F
 login
line vty 5 15
 password 7 0500112E0D44542F
 login
!
ntp clock-period 36029241
ntp max-associations 1

end

Mikrotik setup

# jul/06/2016 12:41:29 by RouterOS 6.35.4
# software id = 0ZDA-MDT8
#
/interface bonding
add mode=802.3ad name=Cisco3750 slaves=ether1,ether2,ether3,ether4 \
    transmit-hash-policy=layer-2-and-3
/interface vlan
add interface=Cisco3750 name=Cisco-vl2 vlan-id=2
add comment="\D2\F0\E0\ED\E7\E8\F2 Cisco" interface=Cisco3750 name=\
    Real-IP-vl8 vlan-id=8
add interface=Cisco3750 name=Voice vlan-id=7
/ip neighbor discovery
set Real-IP-vl8 comment="\D2\F0\E0\ED\E7\E8\F2 Cisco"
/ip dhcp-server option
add code=66 name="Cisco CP7940" value="s'172.30.28.87'"
/ip pool
add name=dhcp_pool1 ranges=10.20.10.5-10.20.10.254
add name=172.16.0.0 ranges=172.16.0.2-172.16.0.254
/ip dhcp-server
add add-arp=yes address-pool=dhcp_pool1 always-broadcast=yes authoritative=\
    yes disabled=no interface=Cisco-vl2 name=dhcp1
add add-arp=yes address-pool=172.16.0.0 always-broadcast=yes authoritative=\
    yes disabled=no interface=Voice name=Voice src-address=172.26.0.2
/ip address
add address=10.20.10.2/24 interface=Cisco-vl2 network=10.20.10.0
add address=46.174.71.3/24 comment=\
    "\D1\F2\E0\F2\E8\F7\ED\FB\E9 ip \ED\E5 \F2\F0\EE\E3\E0\F2\FC" interface=\
    Real-IP-vl8 network=46.174.71.0
add address=172.26.0.2/24 interface=Voice network=172.26.0.0
/ip dhcp-server network
add address=10.20.10.0/32 dns-server=10.20.10.2 gateway=10.20.10.2 netmask=24
add address=172.16.0.0/32 dns-server=10.20.10.2 gateway=172.16.0.2 netmask=24 \
    ntp-server=172.30.7.2
/ip dns
set servers=10.0.0.6
/ip firewall nat
add action=masquerade chain=srcnat out-interface=Real-IP-vl8
/ip route
add distance=1 gateway=46.174.71.1
add distance=1 dst-address=172.16.0.0/16 gateway=10.20.10.1
add distance=1 dst-address=172.30.0.0/16 gateway=10.20.10.1
/ip route vrf
add interfaces=Voice routing-mark=1
/ip upnp
set enabled=yes
/system clock
set time-zone-name=Europe/Kiev
/system leds
set 0 interface=wlan1
/tool romon
set enabled=yes
/tool traffic-generator
set test-id=1

Answer 1

inattention

/ip dhcp-server network
add address=10.20.10.0/32 dns-server=10.20.10.2 gateway=10.20.10.2 netmask=24
add address=172.16.0.0/32 dns-server=10.20.10.2 gateway=172.16.0.2 netmask=24 ntp-server=172.30.7.2

And it should be

/ip dhcp-server network
add address=10.20.10.0/24 dns-server=10.20.10.2 gateway=10.20.10.2 netmask=24
add address=172.16.0.0/24 dns-server=10.20.10.2 gateway=172.16.0.2 netmask=24 ntp-server=172.30.7.2

and specify the address of the relay in the dhcp server on the mikrotik.
Also explain why you need such a design?

/ip route vrf
add interfaces=Voice routing-mark=1

Answer 2

I understand that for each vlan you will need to raise your own DHCP server (and vlan on Mikrotik)? or you can specify only subnets (pools) and Mikrotik will give them on request