TP-LINK TL-WR1043ND died after flashing with MTD utility, can it be resurrected?

Question

Network administration

TP-LINK TL-WR1043ND killed when trying to flash via MTD
Now all the indicators are blinking... Refuses to enter Telnet. The indicator of the connected LAN does not even light up
During the firmware, the light went out ... Is it possible to revive it ???
Or all?

Answer 1

Read here wiki.openwrt.org/toh/tp-link/tl-wr1043nd

Answer 2

Here is the procedure for restoring the router through the serial port. This is the only thing that will help in your case.

Answer 3

In addition to time valuation, you can use other costing methods. Basically, all beginners cannot adequately estimate the time for which they will do this or that work. Yes, and for an experienced master, this can also happen sometimes. It all depends on the project and the person. We also do not ignore individual characteristics. And it is desirable for the client to know the exact or approximate price before the start of work, and not when it is completed and the time spent for calculations will be recorded. That's why I started by estimating the layout sections, not the time per job. Each section is 800 rubles (price tag for a junior). And we consider header, footer, different blocks. The price turns out to be very adequate for both parties and it is easy to calculate.
Now I don't count sections, but BEM entities. It’s more convenient for me than time estimation (regarding layout, I estimate some work by time, everything is described very well in the answer about time estimation above) I typeset according to BEM and disassemble the entire project into independent blocks. For example, the layout of some card, and it is used in 5 places on the site with 2-3 types of customizations, depending on the placement, but thanks to BEM I only layout it once. Then just arrange the finished classes. Therefore, I consider BEM entities, if they are repeated many times, I also add a small amount. Council working, so I thought starting from my second order. And after the first unsuccessful one, where I estimated it very cheaply, everything went well. And earnings and customers) finding customers is a separate issue)
On landing (also implementation) of the layout, it all depends on how you work with the backend. I think it’s suitable for you to take 50-100% of the cost of layout for landing. Depending on the complexity.
And my advice is how to work quickly and efficiently. Learn modern tools for work. Project builders, preprocessors, BEM, and so on. By my nature, I begin to be interested in these things even before I got a good knowledge base, and this helped me to quickly do my job with high quality, in a short time, modern and convenient. Each job does not look like another routine. Due to all these modern tools, it is very interesting to work every time.
Also, if you draw designs yourself, then study the eight pixel grid . Or tell the designer you work with about it. As well as atomic design. The principle is the same as BEM, only in relation to design. And the assessment is very easy to make and typeset.
https://habrahabr.ru/company/everydaytools/blog/31...

Answer 4

Always voice more, because in any case, there will be some, albeit small, but improvements. And it’s better to calculate based on how much time you spend on the project.

Answer 5

Formula for indicative estimation.

Answer 6

the assessment comes from experience
to make it easier, you always need to voice the plug

Answer 7

For non-standard work, to simplify it very much: break it down into clear and small steps (you can’t do without it), estimate by time and material, multiply by the rate, increase a little by the coefficient. In other ways, it’s more accurate not to evaluate - who will guess how.

Answer 8

If planning and estimating a project in advance is difficult (a common problem for many), record the amount of work you do on current projects. Write down at work how much time it takes in fact. Compare the next order with what you did before and rely on the figures that were obtained there for labor costs. Gradually, you will give more and more accurate assessment.