To select a piece of iron of level of access?

Question

Computer networks

Good time community! I need to select access level switches (10 in total) for an office building.
The switches will be located on the floors and receive twisted-pair cables from all cabinets on this floor.
What should be able to:
- Connect to a vertical SCS via optics, speed 10 Gbps.
— 48 ports 100/1000 Mb.
- Ports ehernet can give both data and voice (or a combo on one port).
- Must be able to work with VLANs, well, so that they are enough.
- The vendor is better than cisco, if there is a good alternative, write.
- The ability to manage the switch via a web interface or a separate software with a GUI (so that a responsible person can quickly assign vlans to ports for a specific switch).
I won’t say about the budget, just to bookmark the budget, you need to pick up pieces of iron. All in all, a good piece of hardware at a reasonable price.

Answer 1

The Catalyst 2960 will suit you. In the required configuration (2 10G SFP + 100/1000 per port)
There are analogues e D-Link. But I'm not good at them.
I advise you to take a responsible person with straight arms, and not guises.
dialing is a matter of seconds

conf t
int range f0/1 - f0/48
switch acc vlan 7
switch acc voice vlan 12

Waiting for some flash to do it is much longer, and there is no guarantee that everything will not fall after that ...

Answer 2

DGS-3120-48TC
dlink.ru/ru/products/1/1408.html

Answer 3

Extreme x440 as an option. True, I won’t say what’s with the guises ...

Answer 4

There is nothing more efficient than CLI in my opinion.