Seamless Wifi on mikrotik?

Question

WiFi

Good afternoon,
I ask for help in parsing the problem.
There are 2 mikrotik at the moment. Both have only 1 ether port. created on 1 capsman without local forwarding.
wlan, ether are in the bridge for both devices.
Both devices receive IP from the dhcp server and must distribute from the same subnet, the pool is configured.
There is a problem if you connect any device to the 2nd device, capsman disconnects and the logs say bridge port received packet with own address as source probably loop
Please tell me how to solve this problem. If I turn on local forwarding, everything works, but when moving from one point to another, it disconnects and reconnects.

Answer 1

You did not specify the version, but I hope you have fresh ones. Here's a pretty good article for you.
https://serveradmin.ru/nastroyka-capsman-v-mikrotik/

Answer 2

You don't need to make a bridge out of a Mikrotik port and wlan. Create an empty bridge, for example BRIDGE-WIFI and specify it when creating the Datapath. Capsman itself will then add access points to it. After all, Capsman can be on any device (Mikrotik) on the network, not necessarily on a router that gives access to the Internet. In my office, for example, it is on a switch, in another - on a router that is a backup, and so on.