Problems with the video card (monitors blink, and the video card constantly "reboots"), what should I do?

Question

Video cards

Good afternoon, I have such a problem - the card is going crazy. I have two monitors, they are connected to the video card (yeah, but how else?). Video card GeForce GTX 1660 Super. Recently (from the day before yesterday) such a game began - I start the PC, Windows starts to load, and both monitors start turning on and off at intervals of 10 seconds (they turn off for 2 seconds, as if I cut them off with a button - then turn them on again), and the video card restarts as if (the screws start to unwind, as if I just turned on the PC, then they stop - the cycle has passed).

The problem is always observed (until Sunday there was only one out of 10 launches and was solved by restarting the PC, now every launch). I noticed such a thing, if you remove the firewood, it stops blinking (and everything is fine in the BIOS, the monitors do not go crazy). It makes me think in the direction of the driver, or the OS (Windows 10).

I already tried to roll back the firewood (to the December version), yesterday it seemed to be ok, but today I turned on the computer and the same garbage started again - I'm already starting to fall into despair ...

Here is a video with a monitor and vidyuhi screws: https://dr. ..
Video just with two monitors and their disco: h...

I'm already thinking of trying to install Linux and see what happens there....

I'll be glad if somehow I can solve all this crap, thanks to everyone for the answers and feedback!)

Answer 1

The solution is very simple - bring it to the service.

Answer 2

1. Check the work with 1 monitor, pull out the second completely. Then swap.
2. Check the work with two monitors under any LiveCD boot image, windows or linux, no difference.
After that, it will become clear that the matter is in a dead monitor, vidyuhi or Windows.

Answer 3

Depends on goals. Why do you need to change all links?
If for people, then through JS it is possible. If for SEO, then you need to do a filter at the php level.
Making go.php is a wild crutch. If this is WP, then it would be much more correct to make an endpoint. Via add_rewrite_endpoint(). Or through a special page with a shortcode or a separate template.

Answer 4

https://wordpress.org/plugins/search/External+Link/