No beep, no hello when using IVR Elastix. Where to dig?

Question

Asterisk

Good afternoon
If you do not use INbound IVR in the rules - then when you call from a landline number - there is a beep and everything is OK, I
set up IVR (without a greeting first) when you call - there are no beeps, i.e. just silence, the same when using a greeting
in the trunk,
host=IP
type=peer
disallow=all
allow=ulaw,g723,alaw
tell me where to dig

Answer 1

First of all, dig the logger.conf logs
into the full section, add debug if it is not there
and see what happens when you call

Answer 2

the logger already has full => notice,warning,error,debug,verbose
that's what I see in the logs
[Jul 21 10:10:27] VERBOSE[3070] netsock2.c: == Using SIP RTP TOS bits 184
[Jul 21 10 :10:27] VERBOSE[3070] netsock2.c: == Using SIP RTP CoS mark 5
[Jul 21 10:10:27] VERBOSE[14599] pbx.c: -- Executing [[email protected] AsiaInfo:1] Set("SIP/AsiaInfo-00000019", "GROUP()=OUT_2") in new stack
[Jul 21 10:10:27] VERBOSE[14599] pbx.c: -- Executing [[email protected] trunk-sip-AsiaInfo:2] Goto("SIP/AsiaInfo-00000019", "from-trunk,964555,1") in new stack
[Jul 21 10:10:27] VERBOSE[14599] pbx.c: -- Goto (from-trunk,964555,1)
[Jul 21 10:10:27] VERBOSE[14599] pbx.c: -- Executing [[email protected]:1] Set("SIP/AsiaInfo-00000019", "__FROM_DID=964555") in new stack
[Jul 21 10:10:27] VERBOSE[14599] pbx.c: -- Executing [[email protected]:2] Gosub("SIP/AsiaInfo-00000019", "app-blacklist-check,s,1") in new stack
[Jul 21 10:10:27] VERBOSE[14599] pbx.c: -- Executing [[email protected]:1] GotoIf("SIP/AsiaInfo-00000019", "0?blacklisted") in new stack
[Jul 21 10:10:27] VERBOSE[14599] pbx.c: -- Executing [[email protected]:2] Set("SIP/AsiaInfo-00000019", "CALLED_BLACKLIST=1") in new stack
[Jul 21 10:10:27] VERBOSE[14599] pbx.c: -- Executing [[email protected]:3] Return("SIP/AsiaInfo-00000019", "") in new stack
[Jul 21 10:10:27] VERBOSE[14599] pbx.c: -- Executing [[email protected]:3] ExecIf("SIP/AsiaInfo-00000019", "0 ?Set(CALLERID(name)=312637751 )") in new stack
[Jul 21 10:10:27] VERBOSE[14599] pbx.c: -- Executing [[email protected]:4] Set("SIP/AsiaInfo-00000019", "__CALLINGPRES_SV=allowed_not_screened" ) in new stack
[Jul 21 10:10:27] VERBOSE[14599] pbx.c: -- Executing [[email protected]:5] Set("SIP/AsiaInfo-00000019", "CALLERPRES()=allowed_not_screened" ) in new stack
[Jul 21 10:10:27] VERBOSE[14599] pbx.c: -- Executing [[email protected]:6] Goto("SIP/AsiaInfo-00000019", "ivr-3,s, 1") in new stack
[Jul 21 10:10:27] VERBOSE[14599] pbx.c: -- Goto (ivr-3,s,1)
[Jul 21 10:10:27] VERBOSE[14599] pbx.c: -- Executing [[email protected]:1] Set("SIP/AsiaInfo-00000019", "MSG=custom/test_ulaw") in new stack
[Jul 21 10:10:27] VERBOSE[14599] pbx.c: -- Executing [[email protected]:2] Set("SIP/AsiaInfo-00000019", "LOOPCOUNT=0") in new stack
[Jul 21 10:10:27] VERBOSE[14599] pbx.c: -- Executing [[email protected]:3] Set("SIP/AsiaInfo-00000019", "__DIR-CONTEXT=") in new stack
[Jul 21 10:10:27] VERBOSE[14599] pbx.c: -- Executing [[email protected]:4] Set("SIP/AsiaInfo-00000019", "_IVR_CONTEXT_ivr-3=") in new stack
[Jul 21 10 :10:27] VERBOSE[14599] pbx.c: -- Executing [[email protected]:5] Set("SIP/AsiaInfo-00000019", "_IVR_CONTEXT=ivr-3") in new stack
[Jul 21 10 :10:27] VERBOSE[14599] pbx.c:-- Executing [[email protected]:6] GotoIf("SIP/AsiaInfo-00000019", "0?begin") in new stack
[Jul 21 10:10:27] VERBOSE[14599] pbx.c: -- Executing [[email protected]:7] Answer("SIP/AsiaInfo-00000019", "") in new stack
[Jul 21 10: 10:27] VERBOSE[14599] pbx.c: -- Executing [[email protected]:8] Wait("SIP/AsiaInfo-00000019", "1") in new stack
[Jul 21 10:10:28] VERBOSE[14599] pbx.c: -- Executing [[email protected]:9] Set("SIP/AsiaInfo-00000019", "TIMEOUT(digit)=3") in new stack
[Jul 21 10:10:28 ] VERBOSE[14599] func_timeout.c: -- Digit timeout set to 3.000
[Jul 21 10:10:28] VERBOSE[14599] pbx.c: -- Executing [[email protected]:10] Set("SIP/ AsiaInfo-00000019", "TIMEOUT(response)=10") in new stack
[Jul 21 10:10:28] VERBOSE[14599] func_timeout.c: -- Response timeout set to 10.000
[Jul 21 10:10:28] VERBOSE[14599] pbx.c: -- Executing [[email protected]:11] Set("SIP/AsiaInfo-00000019", "__IVR_RETVM=") in new stack
[Jul 21 10:10:28] VERBOSE[14599] pbx.c: -- Executing [[email protected]:12] ExecIf("SIP/AsiaInfo-00000019", "1?Background(custom/test_ulaw)") in new stack
[Jul 21 10:10:28] VERBOSE[14599] file.c: -- Playing 'custom/test_ulaw.ulaw' (language 'en')
[Jul 21 10:10:32] VERBOSE[14599] pbx.c: -- Executing [[email protected]:13] WaitExten("SIP/AsiaInfo-00000019", ",") in new stack
As you can see asterix is ​​loading the file - but nothing is heard on the caller +(
hosterpbx*CLI>sip show channels
Peer User/ANR Call ID Format Hold Last Message Expiry Peer
IP 312637751 0000554500002f7 0x4 (ulaw) No Rx: ACK AsiaInfo
1 active SIP dialog