S
S
Sergey2013-12-22 22:05:37
network hardware
Sergey, 2013-12-22 22:05:37

Is there an alternative firmware for dlink dir-320 rev.D1?

Good evening everyone!
A bad head made me buy a new version of dlink dir-320 rev.D1. Native firmware, of course, does not suit weak functionality. Several hours of digging on the Internet did not lead to anything. Actually a question.
Is there an alternative firmware for dlink dir-320 rev.D1?

Answer the question

In order to leave comments, you need to log in

8 answer(s)
S
SergRoss, 2013-12-22
@SergRoss

1. "from Oleg"
2. DD-WRT

Y
yamel, 2014-01-27
@yamel

At the moment, there are no alternative firmware for D1.
Through telnetavailable passwd, iwconfig,reboot

S
Sergey, 2013-12-23
@sergey_privacy

2SergRoss: Thank you, I'll take a look, just recently dd-wrt was not installed on revision D1 yet. Now I'll try to look again.
2SourceCode: I have a lot of control points. It is necessary to interrogate them in chorus, periodically change the password and SSID, reboot a couple of times a day. On revisions B1 is kinetic, on A1-A2 is firmware from vampic. The PHP script selects points from mysql, connects via telnet, does its dirty work with the help of the "nvram ..." commands and writes the status of points and a report on actions to the database.

S
Sergey, 2013-12-23
@sergey_privacy

The list of supported equipment is on the dd-wrt website:
D-Link DIR-320 A1/A2
Those . revisions above are not supported, they have different hardware. And I'm specifically interested in revision D1

S
Sergey, 2013-12-29
@sergey_privacy

What other firmwares are there for dir-320 that can go specifically to revision d1?

S
Sergey, 2014-02-11
@sergey_privacy

Thanks, I'll take a look. I'm still collecting the number and mac-addresses of connected points. How can I get it through the console?

W
wow_alko, 2014-07-01
@wow_alko

I tried to update the firmware on the same router using
20130514_1349_DIR_320AD_1.0.7_sdk-master, but the attempt was unsuccessful, as a result, the router is at the recovery stage. Where can I get the original firmware (1,0,6) to at least restore the previous functionality?

T
tveritin1976, 2014-09-24
@tveritin1976

ftp.dlink.ru/pub/Router/DIR-320A_D1/Firmware/20130... You
can reflash from emergency mode.
1) Turn off the router.
2) Press the reset button
3) Turn on the router
4) Wait for 15 seconds
5) Press reset
6) Connect by wire to the WAN interface of the router, configure the
ip-address 192.168.0.X on the network card, where X is from 2 to 254.
7 ) Go to 192.168.0.1
8) Flash.
The site still has 2.0.9 beta, but there are problems with speed. If streaming video you watch will be noticeable.
1.0.7 is better with this, but there are problems with multicast. It turns on very strange, but it works.
I have "so far unofficial" firmware 2.0.14 and 2.5.7 from D-Linka, you can contact t_v_e_r_i_t_i_n_(dog)_l_i_s_t_._r_u . Haven't tried it myself yet.

Didn't find what you were looking for?

Ask your question

Ask a Question

731 491 924 answers to any question