Is it possible to transfer Mikrotik settings to another version of the router?

Question

Mikrotik

Good afternoon!
The Mikrotik R8201 1uias-rm router broke down, the network periodically falls off, only restarting the router helps.
I want to buy a router immediately with Wi-Fi Mikrotik RB 2011UiAS-2HnD-IN.
Is it possible to transfer settings from a broken router to a new one and will the new router work correctly without additional settings?

Answer 1

It is better to transfer by hand, I use the export command on the previous device. On the new one, reset the config and import it line by line through the terminal.
Based on the results, you will need to configure only wi-fi.
But I would advise you to play with the old one before buying a new one.
1) Check or just replace the PSU (if you don't know how to check it)
2) Change it using netinstall and recreate the config from scratch, without copying the old one.

Answer 2

Hardly broken.
Reflash to fresh.
Reset settings.
Set up from scratch.

Answer 3

Connect with a terminal or open a new terminal session in winbox
export file config
Copy the config.rsc file (text file) from Mikrotik. This is the complete config, filled with commands that will set up the device.
To the above tips, we can add that if the device works in a production environment, then it will not be superfluous to clean it from dust. For all its weightlessness, dust is an electrically conductive thing!

Answer 4

Firmware and OS version are the same?
WebFig v6.37.1 (stable)

Answer 5

Similar router Mikrotik RB 2011 UiAS-rm. The network falls off periodically. The router serves as a tunnel to the enterprise server. Previously, the problem was solved by employees by rebooting the outlet. After some time, this did not help either, only winbox could help with the reboot. Sometimes there is access to remote control (1C), but not to the Internet, reboot helps. Sometimes he writes that there is no connection to the DNS, but at the same time he could communicate in the telegram. I tried to upload the settings to another Mikrotik - it does not work yet. But he didn't spend much time on it.
Firmware 6.37.1