Is it possible to expand the RAM in ASUS UX501VW beyond the officially supported limit so that at least some of it works?

Question

Iron

Folks, does anyone know for sure what will happen if I put a 16GB RAM module into the ASUS UX501VW? Will at least some of the memory work?
(Given the fact that it is officially supported up to 16GB in total, and I already have a Samsung M471A1G43DB0-CPB 8GB 64-Bit DDR4-2133 SO-DIMM CL 15-15-15-36 @1.2V installed (Serial number: 15B06F95h ( 2507124757) + 8GB soldered memory) I
plan to install: Kingston HyperX Impact HX424S14IB_16 : 16GB 2G x 64-Bit DDR4-2133 260-Pin SO-DIMM CL 13-13-13 @1.2V ( https://www.kingston. c…eets/HX424S14IB_16.pdf)
I HAVE INSIDE ASUS UX501VW (according to AIDA64 Business):
Intel(R) Core(TM) i7-6700HQ CPU @ 2.60GHz (Northbridge: Intel Skylake-H IMC)
Memory types supported: DDR4-1333, DDR4-1600, DDR4-1866, DDR4-2133 SDRAM
MAX memory: 64 GB
Version: 07
Process technology: 14 nm
VT-d:
Extended APIC (x2APIC) supported
: Memory controller supported:
Type Dual Channel (128bit)
Active Mode Dual Channel (
128bit) Memory Timings:
CAS Latency (CL) 15T
RAS To CAS Delay (tRCD) 15T
RAS Precharge (tRP) 15T
RAS Active Time (tRAS) 36T
Write CAS Latency (tWCL) 13T
CKE Min. Pulse Width (tCKE) 6T
Refresh Period (tREF) 8316T
Round Trip Latency (tRTL) DIMM2: 65T, DIMM4: 65T
I/O Latency (tIOL) DIMM2: 4T, DIMM4: 4T
Burst Length (BL) 8
Error Correction:
ECC Not Supported
ChipKill ECC Not Supported
RAID Not Supported
ECC Scrubbing Not Supported
Memory Sockets:
DRAM Socket 1 8 GB (DDR4 SDRAM)
DRAM Socket 2 8 GB (DDR4 SDRAM)
PS Thank you all in advance for your opinions and advice

Answer 1

The above module is correct. Topic closed. Received RAM expansion from 16GB to 24GB.