Installed new RAM and when booting up the PC freezes tightly. What to do?

Question

Windows

I bought and installed a new RAM (HyperX Fury 1600 4GB), because 1333 was not. I know that the motherboard supports up to 1866, and the processor supports up to 1333 and that my RAM will simply work according to the bus MHz, but I ran into a problem: the PC starts up and on the Windows 10 system recovery circle the PC hangs tightly, after rearranging to the old RAM (in two channels 2x2 ) everything works, is there any way to fix this? I can’t reliably find out if the new opka is working, because memtest86 (or whatever it is) does not load, only the stick in the corner blinks. Guys help please!!!! I will be sincerely grateful.

Answer 1

What model of motherboard and memory? Old mothers cannot work with new DDR3 modules with 512 MB chips, only 256 MB. For example, there should be 16 chips on a 4 GB module. and they should be located on two sides, and not on one.