Answer the question
In order to leave comments, you need to log in
In the socket 150V in the evenings (St. Petersburg). Where to complain?
St. Petersburg, Kirovsky district. The last couple of weeks in the evenings, the voltage in the network drops to ~ 150V, a record of 135V.
Oops squeak (APC, operating from 160), the microwave does not heat, the refrigerator rattles, and so on.
In an emergency contacted, created a request and silence. The light is on and normal.
What to do? Do not offer to change the country.
Answer the question
In order to leave comments, you need to log in
Complain again.
To come personally to the directorate of the customer, to irritate the eyes of the boss. Threaten the prosecutor.
If they do not react at all, you can buy a voltage stabilizer. Now I googled, googled that there is a range of 120-280 V. The most common are 140-260 V, they seem to be not very expensive. As a last option.
Kind of weird. Always if there were problems with the voltage in St. Petersburg (like it sank below 180), the electricians responded adequately.
You can also try to walk around the neighbors - they probably already burned something during this time, but they don’t know the reason. You will then fight with them.
Try to understand the technical reasons as well. It seems that this can happen if the zero burns out (the contact is bad), and in my opinion it may end up on the contrary with increased voltage (up to 380). It can also be only you alone in the apartment (in the meter), respectively, the housing office does not itch.
Maybe you have a wiring problem? You can’t measure it on the landing in the shield (carefully, there are high-voltage bare wires)?
> created an application and silence
Duc, it is necessary to achieve a response to the application at least. Because our citizens are not particularly conscious, they simply put these appeals on these appeals or send replies at best. And what is an emergency? Write applications to your MA. In case of non-response or unsubscribing, it is necessary to proceed further - write to the GZhI and along the chain.
Didn't find what you were looking for?
Ask your questionAsk a Question
731 491 924 answers to any question