I ask you to help with setting up Windows 10 and so that damaged files do not appear in Windows. What to do?

Question

Windows

A couple of weeks ago I assembled a computer with new hardware bought with a guarantee. I started installing Windows on a 480GB Kingston ssd + 1TB HDD. Ssd had a problem with it for a year already that there were a lot of damaged sectors, I decided not to buy a new one, but to fix it I downloaded the Victoria program and tried to fix everything with it for several days and I realized that it was useless because there were a lot of damaged sectors and I decided on a low-level format and after that I formatted it from Windows and the disk was restored, I checked the sectors in the Victoria program as new and I put an end to this disk, then it was in perfect order. Hdd I bought for 1 TB a long time ago, but he was lying on the shelf all the time waiting for his hour, I also checked it in the Victoria program and it was normal with him, too, everything was okay. Vryatli these are disks. Here on the ssd there was already Windows 10 from the old laptop. Put ssd in new pc. Windows started up and I installed all the drivers for the video card, processor and motherboard, but after a couple of days I got damaged files associated with mail in Windows. Mail didn’t want to open at all and even in the search to write the word “by” the search immediately flew out. I watched a lot of videos on this topic, nothing helped, and most importantly, recovery did not work due to damaged files. I decided to return Windows to its original state by deleting everything from the disks and now I put Windows on and it keeps me for 3 days and this time I have a black screen with a cursor tried to restore it didn’t work the same damaged Files that Windows could not read them okay I said and reinstalled Windows again the same situation was also nothing helped reinstalled again. I decided to think maybe I configured Windows incorrectly at the very beginning, I did this: I went into the update and Windows installed all the new updates, then I went to install the driver for the video card and the processor, installed it) and so I decided to use the solution pack driver where he downloaded all the missing drivers to pc and so I set it up every time, but now I didn’t boot at the same desktop itself, I also reviewed a lot, I saw nothing helped. I reinstalled Windows. And so I reconfigured Windows and did everything and decided not to use the solution pack driver, and this was most likely the right step or not. Winda lasted 4 days is a record!! Then I decided to install the realtek audio driver and I had to reboot and reboot, and it loads for me and here again this black screen,
I won’t talk further and I wrote so much, and at least two more times I reinstalled Windows, I just want to say that you helped me with setting up Windows and that there were no damaged files. I will briefly describe how I set up Windows: the first driver for the processor, vidyuhu; the second update of Windows and all the other drivers that came with the update of Windows and did not use the driver pack (in it I installed the pros and decided what not to install from programs like antivirus. only drivers)

Answer 1

If the SSD / HDD is dead, then it is dead and nothing can be done about it. Throw it away and buy a new one.
PS It is also an option to install the utility from Kingston and update the SSD firmware, but it is unlikely that it will help if the disk has already fallen.

Answer 2

ssd it had a problem with it for a year already that there were a lot of damaged sectors, I decided not to buy a new one, but downloaded the Victoria prog to fix it

SSD is thrown away or handed over under warranty, but certainly not repaired.
And the program that you downloaded is designed for diagnostics.
I would like to see how you are going to fix the SSD with a program ....