How to set up the nanobridge M5 correctly?

Question

Programming

SW. connoisseurs, forum users and masters, please, explain to the teapot, that is, to me, how and what I need to change in the settings in order to achieve a more stable signal.

The thing is that I have 2 nanobridge m5, of which one hangs on the wall of the balcony of the 8th floor (transmits), the second is raised 15-18 m above the ground, I receive a signal, but it always changes for me, this can be seen on the nanobridge m5 settings page, I will attach a photo of the settings to the letter.
I used to have it on the roof of a nine-story building and the signal was -92, everything was fine, but now it jumps from 64 to 71, I took it off the roof, because the house manager wanted me to pay her monthly for the fact that the antenna is there will stand, I'm not going to pay her for it, and I had to remove the antenna ...
I will also add that I am a fan of online games, and ping plays a very important role in them, and my ping always jumps.
I really appreciate your help, thank you so much in advance!

Answer 1

Hello.
1. Is there direct visibility between nanobridges? Are there any obstacles in the fresnel zone? trees, branches, houses?
nanobridge.com.ua/calculator-wi-fi
2. The screenshots show that you need to increase tx/rx on the 8th floor.
and yes, increase the frequency, the fresnel zone will decrease. Try.

Answer 2

thank you for your answer, but please tell me how to do it, where in which tab and what to press, thanks in advance