How to set up an ip camera on MicroTik map 2n (computer 1 port(ethernet1-gateway) ip camera 2 port(ethenet2))?

Question

network hardware

Equipment:
MicroTik map 2n - local ip - 192.168.88.1;
IP camera - ip address - 192.168.1.22;
A computer.
Conditions:
You cannot change the addresses of either the router or the camera.
Bottom line:
A computer connected to the first port of the router addressing the ip address 192.168.88.1 should get to the web interface of the camera. Also, when using (for example, the ISpy program), an image should be displayed on a computer when connected to the camera.
Question:
How to connect the camera and the computer to the router in this way?
I tried to forward ports, but apparently crooked hands are still for such manipulations, or I just don’t understand how to properly configure NAT in this case. I deal with MicroTik for the first time on other routers, I forwarded ports for access from the Internet or in LAN, but I never encountered this situation. Please help me solve the problem.

Answer 1

Nat has nothing to do with it. On the router, add an address to the interface that looks towards the camera. Address from the same network as the camera.