How to realize control of gas boiler and gas fireplace?

Question

Smart House

Good day to all! I thought about the issue of the possibility of controlling gas equipment via GSM \ scheduler located at home (apartment building, double-circuit gas boiler (hereinafter referred to as "boiler")) and in a country house (gas fireplace (hereinafter referred to as "fireplace")).
details:
boiler: double-circuit gas brand protherm, on the muzzle 2 twisters and a screen with the temperatures of the circuits.
fireplace: a five-position auto-ignition switch (like on a stove)
as a controller, something like a wirenboard.
what are the assumptions? it is desirable to use budgetary solutions.

Answer 1

If the boiler / fireplace has contacts for control in principle, it can be configured to work with automation, but the previous commentator is right, you need to approach this issue carefully, weighing the pros and cons! regarding the implementation of the budget decision, doing it yourself is the most budgetary. I made a similar device for myself only with heating the house from electricity, read it, maybe it will help you https://geektimes.ru/post/294671/

Answer 2

thanks for answers. The answer was found for the boiler. It's just an external thermostat. Clings in a few minutes. Even with hands of a fair amount of curvature. But with a fireplace we are looking for solutions further.

Answer 3

There is only one offer here - to buy a ready-made solution.
Intervention in gas equipment requires calling a specialist from Gorgas, certification, or something like all this garbage and other things.
And in general, I would not advise climbing into gas equipment from the word at all.