Answer the question
In order to leave comments, you need to log in
How to organize PC access to several VLANs at the same time?
The situation is as follows: in the local network there are several VLANs in different subnets. There is a workstation (regular office PC) with Windows 10, which can be connected to the trunk port of the switch in order to have access from this PC to all vlans at once.
The problem is that the Intel® Gigabit LAN network adapter built into the ASRock H97M Pro 4 motherboard does not seem to support the 802.1q standard (at least there is nothing about this in the specification for the motherboard).
There are servers on the local network (also based on ordinary PCs) with built-in Realtek network adapters - there is a proprietary Realtek Ethernet Diagnostic Utility for them
, which allows you to configure VLANs (creates virtual network adapters with an assigned Vlan ID, each of which is then configured to the desired subnet). Everything works there without problems.
Is it possible to organize the same with the specified Intel Ethernet 1218-V network adapter using some third-party software under Windows 10?
Updated
Thank you all, the issue is generally resolved with the help of Alexander @NeiroNx . It turns out that Intel, like Realtek, also has its own specialized software for receiving and processing tagged traffic - Intel® Advanced Network (Intel® ANS) VLAN. My adapter, as it turned out, supports this technology, and the only problem is the temporary incompatibility of the above software with Windows 10 (everything is ok with earlier versions of windows). They promise to soon organize and support dozens, we'll wait ...
Answer the question
In order to leave comments, you need to log in
Third party software, third party drivers. www.intel.ru/content/www/ru/ru/support/network-and... if your adapter is not in the list then intel will tell you where to go - buy an adapter from the list.
Who prevents to deliver a network card which software supports???
Хотел бы актуализировать.
Суть вопроса похожа.
Но из оборудования стоит Huawei HG8245A
Голос 50/5 и интернет 20/2 подняты на разных vlan/801p
Телефон от модема работает.
Мне нужно подключить программу телефонии типа црм на виндовзе.
провайдер прячет имс сервис в адресах 10.x.0.(9-41)
Локальная сеть в 192.168.100.х
На роутере прописан роуты, и тот который на voip - 10.164.64.0 255.255.192.0 0.0.0.0
есть два проводных адаптера и вайфай. на проводных можно задать только один vlan.
и есть что-то похожее на настройки, которые я пытался задавать:
Didn't find what you were looking for?
Ask your questionAsk a Question
731 491 924 answers to any question