How to open the front case cover?

Question

Do it yourself

Hi! I have a Deepcool Dukase V3 computer case. I just can't remove the "muzzle" of the case in order to put two more coolers, otherwise World of Tanks at 10fps: D The latches cannot be pushed out. Maybe I don't notice something? The instructions do not describe how it should be removed. Maybe someone faced such a problem? Thank you.
PS I squeezed the latches and pushed them out with a force pulling the block "with the filling" behind them, they didn’t give in, but somehow I didn’t want to break either ...
PPS There are on the Internet with the covers removed, but how ?!
Before:

Tyk

After:

Klats

Answer 1

All case fans in Deepcool Dukase are mounted on Phillips screws without vibration damping pads. To install fans on the front wall, it is necessary to dismantle the front panel with the door. It is supported by six plastic struts made of a harder plastic than required. The panel is removed in only one available way: you need to grab the cutout at the bottom and pull it towards you. One or two spacers after such a rough act will most likely be broken off, so you need to act with the utmost care.

Answer 2

There are a couple of screws on each side, if there is, unscrew it.
Press the bottom latches and push the cover a little bit from the bottom. Then the middle ones and also push out. Same with the top ones. It should work :)

Answer 3

It is necessary with all the dope to pull from the bottom of the cutout