How to make tagged/untagged vlan on port on Mikrotik?

Question

Mikrotik

Good afternoon.
There is a task on the Mikrotik RB750 to send two vlans from the port, but so that one is untag, the second is tagged.
for example

switch vlan10, vlan20 tag 
  |
RB750 1 port 
 - 2 port vlan10 tag, vlan20 untag
 - 3 port vlan10 tag, vlan20 untag

on a regular L2 switch, it's just pvid or the so-called. gybrid mode, on mikrotik I can only give
one vlan untag. Someone faced? Is it possible to do so at all?
Thanks

Answer 1

in general, everything is much simpler
, the logic of my actions is correct, but the firmware was from the 5th branch, updated to RouterOS 6.15
and it all worked.
for example, 2 tag vlans 10 and 20 come to port 1,
create vlans V10, V20 on ether1, V10-TAG-E2 on ether2 on the second port 10 tag 20 untag, combine them into bridges

BR10 <--- V10 + V10-TAG-E2 - vlan10 tag
BR20 <--- V20 + ether2 - vlan20 native

Answer 2

You just need to add the vlan interface and specify the desired port in the wizard. This will be the Taget. And the traffic launched on the master port will be an anti-age.