How to install MacOS on HP Pavilion Power 15 laptop?

Question

laptops

Hello, tell me how to install Mac OS HighSierra on an HP Pavilion Power 15 laptop ( https://support.hp.com/en-us/document/c05566773)!? I plan to install Mac OS on an external hard drive!
Full laptop specification here: https://yadi.sk/d/tkqSq_RZTAwxXQ
Thank you!

Answer 1

Put it in a virtual machine ... especially if it's on external media

Answer 2

This is a question from the series: how to assemble a large aircraft from a smaller aircraft, I plan to assemble it at a nearby airfield, the full description of a smaller aircraft is here: http://useful_information.rf.
In fact, everything is not so simple here and you need to decide on the goal. If the goal is to install OSX in order to use x-code on it, then this is an extremely pointless undertaking, since you will not be able to get a dev-id with hackintosh.
If you just play around, then you need to find drivers for all your hardware, the so-called KEXT (well, for example here ), google what the clover bootloader is, get a mac osx image on any convenient [censure] tracker, following the attached instructions to roll the image to flash drive and go install, praying that there would be no kernel panic and loops.
Well, in the end, in general, such things are first carefully googled, so while I wanted to give you a link to clover, the very first article in the list with habr . The article does not really reveal the meaning, but it is worth looking into the comments, there you will find many interesting links.

Answer 3

You can go here . There is more information on this.

Answer 4

Hello, I installed sierra, high sierra and catalina on an HP Pavilion Power 15-cb015ur laptop as a second system next to windows. Now I want to upgrade to big sur. After installing catalina, the nvidia video card and wifi do not work, the Internet is only by wire. Although you can buy an external wifi module. hdmi not working. The second monitor is connected via purchased USB 3.0 to DVI / VGA Adapter - 2048x1152 (USB32DVIPRO StarTech.com). Still want to bet? Then here are a few recommendations: 1. Watch the Alexey Boronenkov channel on youtube on how to configure clover or opencore (I bet on clover, but big sur is better on opencore) 2. Disable legacy mode and virtualization technologies in bios (after installation, you can try to enable it) . Here are some useful links: 1) creating a bootable flash drivehttps://www.youtube.com/watch?v=TV7jMbjQbVY&ab_cha... 2) The first working clover that I started https://www.tonymacx86.com/threads/hdmi-no-video-h... 3 ) My clover without smbios: https://drive.google.com/file/d/1CqOrBnO72OP27I82A... . Try to install according to the instructions in the video, and then replace the clover folder with my clover. After that, add serial numbers for smbios to config.plist. (see channel Alexey Boronenkov). Our laptops differ only in the precessor, I have an Intel Core i7-7700HQ, make sure that yours is specified in config.plist. Good luck.