How to implement two WiFi points on the same router connected to different VPNs?

Question

D-Link

Good afternoon.
It is required to do the following on the Dlink Dir 320 router. Create two WIFI networks, which in turn will provide access to different VPNs. Is it possible? It is possible to install alternative firmware, OpenWrt or DD-WRT.
There is already a main router in the circuit that receives from the Internet provider.

Answer 1

It is definitely impossible to implement this with stock firmware, with OpenWRT without problems. In short, 2 ssids are created, and accordingly, 2 internal networks with dhcp, two VPN clients are raised without adding a default route, static routing is configured, one default gateway for packets from one network through the first client, the second through the second, respectively. Don't forget to turn on the masquerade.

Answer 2

You could try it on Mikrotik, on D-Link it's easier to put a router (or 2) next to it.

Answer 3

And how do you see the work of two different networks through one radio module and one antenna? Considering that wireless routers now cost from 500 rubles, and yours is 10 years old, I see no reason to waste time experimenting with firmware, when even a successful result will be extremely deplorable in terms of performance. Weigh - by spending 500r you will get a working solution you need in 5 minutes, or it is not known how much fuss with an unpredictable result and the probability of getting a brick.