How to find out why megaraid_sas can't initialize the raid controller?

Question

Debian

I can’t run raid controller 9341-8i in proxmox 6.4 (Debian 10.9) UEFI is disabled in bios, I also tried to install Debian 10.9

driver last downloaded installed, controller firmware is also up-to-date tell me

where to drip

May 4 11:39:45 pve1 kernel: [ 1.654216] megaraid_sas: loading out-of-tree module taints kernel.

May 4 11:39:45 pve1 kernel: [1.654809] megaraid_sas 0000: 07: 00.0: BAR: 0x1 BAR's base_addr (phys): 0x0x00000000fcd00000 mapped virt_addr: 0x0000000082b0d74c

May 4 11:39:45 pve1 kernel: [1.654811] megaraid_sas 0000: 07:00.0: FW now in Ready state

May 4 11:39:45 pve1 kernel: [ 1.654813] megaraid_sas 0000:07:00.0: 63 bit DMA mask and 32 bit consistent mask

May 4 11:39:45 pve1 kernel: [ 1.655012] megaraid_sas 0000:07:00.0: firmware supports msix : (96)

May 4 11:39:45 pve1 kernel: [ 1.655573] megaraid_sas 0000:07:00.0: requested/available msix 17/17

May 4 11:39:45 pve1 kernel: [ 1.655573] megaraid_sas 0000:07:00.0: current msix/online cpus : (17/16)

May 4 11:39:45 pve1 kernel: [ 1.655574] megaraid_sas 0000 :07:00.0: RDPQ mode : (disabled)

May 4 11:39:45 pve1 kernel: [ 1.655578] megaraid_sas 0000:07:00.0: Current firmware supports maximum commands: 272 LDIO threshold: 237

May 4 11:39:45 pve1 kernel: [ 1.655623] megaraid_sas 0000:07:00.0: Configured max firmware commands: 271

May 4 11:39:45 pve1 kernel: [ 1.655778] megaraid_sas 0000:07:00.0: Performance mode :Latency

May 4 11:39:45 pve1 kernel: [ 1.655778] megaraid_sas 0000:07:00.0: FW supports sync cache :

Yes :0x40000009

May 4 11:39:45 pve1 kernel: [ 1.677080] megaraid_sas 0000:07:00.0: Init cmd return status FAILED for SCSI host 5

May 4 11:39:45 pve1 kernel: [ 1.677661] megaraid_sas 0000:07:00.0 : Failed from megasas_init_fw 6694