How to connect Dell R620 to Dell MD3600 SAN?

Question

linux

Hello! Given:
Dell R620, Brocade BR-825 card. The server is connected to a Dell MD3600 disk shelf using SFP+ modules. The server does not see the shelf, the shelf does not see the server.
The drivers for the card are installed in the Debian OS, it is included in the BIOS and is seen in the system like this:
# lspci | grep -i fiber
04:00.0 Fiber Channel: Brocade Communications Systems, Inc. 425/825/42B/82B 4Gbps/8Gbps PCIe dual port FC HBA (rev 01)
04:00.1 Fiber Channel: Brocade Communications Systems, Inc. 425/825/42B/82B 4Gbps/8Gbps PCIe dual port FC HBA (rev 01)
When doing /sbin/rescan-scsi-bus
- 0 new device(s) found.
0 device(s) removed.
Forcibly turned on the loop mode on the card according to this instructionhttps://www.jpaul.me/2013/07/hp-ap770b-brocade-825... is the same.
Where to run, what to do, comrades?

Answer 1

the server is connected to MD through FTs a switch?
on a switch of a zone are configured?
look here i.dell.com/sites/doccontent/shared-content/data-sh...