How to configure L3 switch and DHCP server to work with multiple VLANs?

Question

Computer networks

There is the following scheme: It is

necessary to distribute addresses to all nodes. One pool has been created on the DHCP server. There are no problems with nodes in the standard VLAN 1, distribution does not occur on another VLAN 111. On L3 VLAN 111 there are ports between switches in trunk c allowed vlan all. Tried the following:

int vlan 111
ip helper-address 192.168.10.1 (статический адрес dhcp сервера)

Actually the question is how to correctly configure the L3 switch and CHYADNT?

Answer 1

You write that one pool is created on DHCP. But at the same time, you have at least two vlans, each should have its own addressing, i.e. and there should be two pools.
Specify the complete SVI and routing configuration: sh run int vlan 1 sh run int vlan 111 sh ip route
Specify the pool settings on the DHCP server