How to assign management vlan to 3COM 4400?

Question

network hardware

I'm trying to assign a manager vlan to a 3COM SuperStack3 4400 3C17203 . I'm creating the
necessary vlans.
Select menu option (bridge/vlan): cre
Select VLAN ID (2-4094)[2]: 2
Enter VLAN Name [VLAN 2]: Voice
Select menu option (bridge/vlan): cre
Select VLAN ID (2-4094) [3]: 3
Enter VLAN Name [VLAN 3]: LAN
Vlan info.
Select menu option (bridge/vlan): det
Select VLAN ID (1-3)[1]: 1
VLAN ID: 1 Name: Default VLAN
Unit Untagged Member Ports Tagged Member Ports
------------ -------------------------------------------------- ----------
1 1-24 none
Aggregated Links AL1-AL4 none
Select menu option (bridge/vlan): det
Select VLAN ID (1-3)[1]: 2
VLAN ID: 2 Name: Voice
Unit Untagged Member Ports Tagged Member Ports
------- -------------------------------------------------- ---------------
1 none none
Aggregated Links none none
Select menu option (bridge/vlan): det
Select VLAN ID (1-3)[1]: 3
VLAN ID: 3 Name : LAN
Unit Untagged Member Ports Tagged Member Ports
-------------------------------------------------- ----------------------
1 none none
Aggregated Links none none
Change interface.
Select menu option (protocol/ip/interface): mod
WARNING: Changing IP configuration method may disrupt switch operation
temporarily, or cause loss of communication with the unit.
Select IP interface (1-2): 1
Enter configuration method (auto,manual,none)[manual]: man
Enter IP address [1.1.1.1 ]:
Enter subnet mask [255.255.255.0 ]:
Select VLAN ID (1)[ 1]: 2 <------ how to change vlan?
"2" is not a valid selection.
Select VLAN ID (1)[1]: <------ how to change vlan?

Answer 1

In my opinion, this is how:
from the main menu: prot - ip - bas and then write the address of the switch from the vlan that you have under administration, etc.

Answer 2

Faced the same problem. Somehow decided?