L
L
l2p2015-01-05 12:15:56
Computer networks
l2p, 2015-01-05 12:15:56

How to arrange a server cabinet and which one to take?

It is planned to purchase a sliding wardrobe, so we urgently need to decide what to do with the wardrobe. It is planned as follows:
7903ce97afc842e2bb10d7945735ec94.png
1. There is a wooden partition on the right (it seems you can’t think of anything else), so I guess that you need to hang the cabinet on the wall.
2. Depth is needed no more than 520 mm.
3. I plan to put a mikrotik router + atx mid-tower case there
4. From above, I think to retreat under ventilation. For the same purposes, the cabinet doors will not enter the server part.
I would be glad to any advice on cabinet models, cooling and general layout!
UPD: Also, tell me, please, which UPS (simpler) is better to put in a rack, or even little sockets have been done and I want to save the server.

Answer the question

In order to leave comments, you need to log in

2 answer(s)
A
Anton Teremshonok, 2015-01-10
@TerAnYu

I'm sorry that I'm wedged in, I took the mounting profile like this:
NT AccuPM 6U
Patch panel for it - LY-PP6-07 and socket block - TWT-PDU19-10A8P-1.8 (everything is for an amateur), I placed all this from below, because it's fresh there (warm air rises up :) ), the case from the computer server was laid out horizontally (there was no Desktop case yet).
And so - smart advice was given to you, practical.
Now I’m also thinking of buying a fire extinguisher, otherwise a few years ago the uninterruptible power supply shorted out inside itself and it smoldered for 12 hours, then it caught fire, even though someone was at home, they pulled it out of the socket and filled it with water.

A
Andrey Ermachenok, 2015-01-05
@eapeap

Where is everything? Is it at home? In a wardrobe? Are you afraid of fire?
A server in an ATX case will not fit stupidly into a depth of 540 mm - with a power cord at the back - this is already 600 mm - I just measured it.
There is no need for a closet here - 3 shelves, metal ones are better. And sides-top sheathed with metal.
In UPSe, the batteries are hermetic, but sometimes they leak. Will burn through all the clothes in the boxes under unfavorable circumstances.
That is, it is better to allocate a place under the UPS from below. Yes, and under everything else - too.
The computer will not fit in depth - it turns out that you do not need to put it on its side, but put it along the cabinet. In the background - a shelf for MicroTik and UPS on the floor.
In the door, you can order perforation for ventilation from the bottom and top of the server room, and close it.

Didn't find what you were looking for?

Ask your question

Ask a Question

731 491 924 answers to any question