How on Cisco CUBE to check if a call is in the right dialpir?

Question

SIP

Hello!
I have an already established telephone infrastructure, many providers using the XXXXXX format when contacting our PBX, the new provider transmits numbers in the international format: +7*.
We decided to cut off the first digits and leave only the final digits using translation-rules,
test translation rule 10 [phone]
displays the number in the format we need: 262262.
Due to lack of practice, I encountered the fact that the line appears in debug ccsip all: No matched dialpeer, however, the associated translation-profile in the dial-peer to which the number came has made a modification.
What debug option should be selected in order to trace the call with sufficient information?

Answer 1

firstly, I don’t advise you to thoughtlessly turn on debug ccsip all - the processor loads quite heavily and you can lose control of the device and in general users will have problems
; secondly, to check the matching of dialpeers, you can manually check your dialpeers with this document:
Understanding Inbound and Outbound Dial Peers Matc...
or you can enable debugging: debug voice ccapi inout - in debugging it will be clearly visible which dial-peer the call got into