How come I bought three half-dead WD5000AAKX hard drives?

Question

Iron

Good evening!
A few days ago I bought two kits for assembling computers in Yulmart, among them:
Mat. boards - MSI B85M-E45, CPU - Intel Pentium G3220, memory - KHX1600C9D3 / 4G, PSU - OCZ ZS 550W and WD5000AAKX screws three pieces, one in reserve.
I must say that only three computers were assembled at Haswell before, but there are no problems with them.
Collected, when installing the OS - Win7 Ultimate x86 and a typical set of software - drivers from the office. site, office, browser, pdf reader\editor, Kaspersky Endpoint Security 8 had no problems.
Of the drivers, I did not install only Intel Smart Connect (ACPI \ INT33A0) - I do not understand the purpose of this technology =)
I installed boxes for users and after that, a scandisk (chkdsk) is launched at each start.
Smart shows the following:

In the logs of computer No. 1:

Компьютер был перезагружен после критической ошибки.  Код ошибки: 0x0000007a (0xc0497480, 0xc000000e, 0x97b37860, 0x92e9026c). Дамп памяти сохранен в: C:\Windows\MEMORY.DMP. Код отчета: 050914-14476-01.

Структура файловой системы на диске повреждена и непригодна к использованию. Запустите программу CHKDSK на томе \Device\HarddiskVolume3.

Драйвер обнаружил ошибку контроллера \Device\Harddisk1\DR3.

Драйвер обнаружил ошибку контроллера \...\DR1198 (цифры меняются).

Не удалось загрузить драйвер \Driver\USBSTOR для устройства USB\VID_0BB4&PID_0001\0123456789ABCDEF. (что за устройство непонятно, визуально в диспетчере его нет, через WMI не искал)

Произошла устраненная аппаратная ошибка.
Сообщивший компонент: ядро процессора
Источник ошибки: Исправленная ошибка проверки компьютера
Тип ошибки: Неизвестная ошибка
ИД процесса: 2 (коды ошибок разные)

#2:

Структура файловой системы на диске повреждена и непригодна к использованию. Запустите программу CHKDSK на томе \Device\HarddiskVolume3.

Произошла устраненная аппаратная ошибка.
Сообщивший компонент: ядро процессора
Источник ошибки: Исправленная ошибка проверки компьютера
Тип ошибки: Неизвестная ошибка
ИД процесса: 2 (коды ошибок разные)

No. 1 once hung with a bsod out of the blue, periodically tries to install some kind of driver, but it does not work out for him.
From what came to my mind:
1. Broken party of hards.
2. Semi-dead motherboards.
3. Someone screwed up with the drivers (but they were taken from the official site and there were no errors during the installation process).
4. Antivirus - the tenth version of this wonderful product successfully blocked the file version of 1C 7.7, forcing the current user to the newly connected one.
What do you think?

Answer 1

What's there to think about? Give the screws back under warranty, as soon as you get new ones - you will deal with mothers and the rest if you have to

Answer 2

What don't you like about SMART data? The screws are clean and almost unused. If you want extra confidence - run a SMART surface test.
This is most likely an assembly / component incompatibility problem. I would start by running memtest.

Answer 3

somehow I have a server with 24 screws that broke the screws, it seems, according to the power supply, so the first 48 screws, I thought it was the broken screws slipped me 8)

Answer 4

The loaders carried the box of hards so neatly. Or delivered by Russian Post.