Hard drive is giving errors

Question

ASUS

Good day.
There was a problem with the computer ... There is: an old computer (2 years old), a new Hitachi Sata-3 1.5Tb hard drive. When using hard, errors occur - the computer starts to freeze periodically for a couple of seconds (most often with active disk access). At the same time, entries appear in the system log - “Controller error \Device\Ide\IdePort0. Source: atapi. They formatted the hard drive, now it’s even worse - I can’t even install the OS ...
The hard drive and the motherboard were checked at service centers, they said that the hardware was working ...
The old computer with the old hard drive (Seagate 300GB) works fine. The second computer (even older) with a new hard drive also works fine (although the OS is loaded from another disk). The satash cable is the same.
What else could be the problem?

Computer config: ASUS P5Q-E, C2D E6750, 4Gb RAM, NV9800GT, 550W PSU.

Answer 1

1. On the motherboard, SATA is implemented on Intel(6), Silicon Image(2) and Marvell(1) chipsets. It is worth trying to switch the hard drive to another controller.
2. You need to look at the SMART hard drive, maybe he will say something. Drive away the TROUBLES with Victoria / MHDD.

Answer 2

You need to check this disk yourself using SMART diagnostic programs (the area where all disk errors are indicated and fixed). Most likely, hitachi is to blame if the old disk does not lead to a freeze. yandex.ru/yandsearch?text=ghjuhfvv+lbfuyjcnbrb+%D1%8B%D1%8C%D1%84%D0%BA%D0%B5&lr=66

Answer 3

BIOS update