CAPsMAN 3 points different channels?

Question

System administration

Hello! There is a banal scheme, Mikrotik 2011rb, 3 access points of the Groove series enter it, it is a controller. I set up capsman, (seamless roaming is so seamless). But now, how can I make the three points work on different channels? created a 3 channel object, but when the points connect to the controller, they pick up cfg1 by default and you can set only one channel object in it. How to make 3 points pick up different configs and, accordingly, channels? Thanks

Answer 1

It is not necessary to explicitly specify the channel in the configuration, this is most likely the case if some one is used by default. It is necessary to remove the prescribed one from the standard cfg1 in the channel, because this is just a template that each device will use by default, if you wish, you can manually configure each point.
You need to enter them separately in the channels:
Below is a list of standard channels.
Channel number Frequency, MHz
1 2412
2 2417
3 2422
4 2427
5 2432
6 2437
7 2442
8 2447
9 2452
10 2457
11 2462
12 2467
13 2472
And after that, at each point in CAPsMAN Interfaces, in the Channel tab, indicate which channel to use.
The main thing is not to forget that only channels 1 - 6 - 11 do not overlap each other, the rest can interfere and there will be problems with Wi-Fi
More details: Configuring CAPsMAN

Answer 2

In my opinion, you need to create completely three different profiles, and in the point finding, specify which point to use which profile. But roaming is unlikely to work correctly