Bridge in proxmox 5?

Question

Debian

Good evening, tell me how to set up a bridge on proxmox. At the moment, the config is the same and the IP address is 192.168.1.3
dmesg | grep -i Eth

[ 0.076003] reboot: HP Compaq Laptop series board detected. Selecting BIOS method for reboots.
[ 0.120508] ACPI Error: Method parse/execution failed [\_SB.PCI0._OSC] (Node ffff941ed30b3c80), AE_ALREADY_EXISTS (20160930/psparse-543)
[ 2.514094] e1000e 0000:00:19.0 eth0: (PCI Express/:2.5Ge s:Width x1) 00:1c:c4:72:d2:f9
[ 2.514096] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 2.514115] e1000e 0000:00:19.0 eth0: MAC: 7 , PHY: 6, PBA No: 1062FF-0FF
[ 2.515500] e1000e 0000:00:19.0 enp0s25: renamed from eth0

source /etc/network/interfaces.d/*

auto lo
iface lo inet loopback
auto enp0s25
iface enp0s25 inet dhcp

Answer 1

What's the problem? Create a bridge in the web interface, specify the ip address, mask and gateway. In the same place, specify the physical interface with which you need to make a bridge and reboot. profit.