Breadboard for prototypes with different track layout?

Question

Arduino

Breadboards usually have vertical tracks, except for V and G which are horizontal.
Are there boards with a different location, for example for this part:

GGGG
VVVV
1 2 3 4

Or even with unsoldered holes? If there is, where can I get it?
I do not want to solder the part itself - it is difficult to solder 3x4 back, and this will have to be done often.
But soldering the leads from below on the breadboard itself would be the best solution. But I haven't seen those.

Answer 1

Actually, this mockup consists of 4 parts, and it has double-sided tape on the bottom. It can be disassembled and, if desired, sawn / swapped. There are soldered breadboards with a similar arrangement of tracks, this is a kind of standard.
UPD:
Of course, there are other breadboards, but they have the same principle. This one, for example, with a built-in arduino. https://www.sparkfun.com/products/14082

I do not want to solder the part itself - it is difficult to solder 3x4 back, and this will have to be done often.
But soldering the leads from below on the breadboard itself would be the best solution. But I haven't seen those.

In your case, it is better to take the right amount of collet sockets / sockets and solder them onto the breadboard. This will be more expensive than other types of connectors, but more reliable.