Why doesn't a shared printer print jobs from other PCs?

Question

Seal

There is a printer that is connected to a computer (pc1) locally via USB and shared from this computer. You need to add this printer to DC and share it from there.
What I did:
-added a local printer to the DC with the installation of firewood
-changed the local port to \\pc1\printer_name and shared it myself
Printing from the DC goes without any problems at all. I connect it to another computer, it connects, firewood is picked up, but does not print. Only "printing error"
Did this several times - there were no problems.
What happened this time - I don't understand
DC 2008R2
Computers 7/10
Firewood tried almost everything
Print Manager is normal.
All computers in the domain
Sharing, etc. also included everywhere.
Where to look and what to smoke?

Answer 1

pk1 thick or thin clients? if thin on DC through the print server, install the printer by setting the path by ip and if thick, if you shared from a thick one, then take it from it and not from DC

Answer 2

To understand what happened, just look at the logs on the computer. Usually in the "Event Viewer" all the necessary information is written. Check the log and post the logs here. And so this is fortune-telling on coffee grounds, it may be blocked, it may be a wall, it may not be shared correctly, it may not be accessible in the security tab, etc. by the list.

Answer 3

Return everything as it was.
In the properties of the printer on the computer to which the printer is physically connected, there must be a "check box" to add to AD. Well, then rummage it through politicians as you please.