Why can't he see the Miktrotik office?

Question

network hardware

Hello. Faced with a non-trivial task. It is necessary to connect two offices with Mikrotiks via VPN, but for these offices to have IP addresses in the range 192.168.1.0/24.
Set up a VPN tunnel via L2TP Client (one server, second client). The letter R appeared, the mycotics saw each other, but they are not allowed to go further into the network. I configured routing on both

Master


Slave


In Firewall-NAT, I registered for both
Chain: dstnat
Protocol: tcp
In. interface: ether1
Action: accept

Answer 1

Solved EoIP tunnel!

Answer 2

That is, you need to set up a VPN between offices with the same IP address?
Then you need netmap
https://it.oneweb.pro/%D0%B1%D0%BB%D0%BE%D0%B3/nas...

Answer 3

192.168.10.17 - is it in the first office or in the second one?
That's when you learn to clearly define and formulate it - then you will most likely reconsider your condition about the safety of networks in offices ....

Answer 4

Go to MUM , they tell you how to shoot yourself in the knee.
I would not do such an ass to myself by any means.

Answer 5

Here they correctly suggested netmap, but first you need to understand and draw your network on paper and you need an understanding of networking technology.
It would be correct if you had one network 192.168.10.0/24, and the second 192.168.11.0/24, that would be correct.