Which printer is the easiest to refuel yourself? Model?

Question

Cartridges

It is necessary to choose a black and white printer. Minimum requirements: I will print ~80-100 pages per day. A4 format. And most importantly, to easily get the paint and fill it yourself. I repeat, fill it yourself ! Tell me which model to choose? For more information, I will be more grateful.
Add. info: Now I use the Samsung-ml-2160 printer. The sellers didn't give any warning. I bought not a printer, but a headache! The disadvantages of which I would not want to see in the next printer: 1) you need to flash it. I don't want to give money to anyone or fool myself. After all, there are printers that do not require firmware. And do not say that it is enough to flash once. Not enough! 2) it is difficult to refill the cartridge yourself. Frankly, I don’t believe all masters: it’s convenient for them to put less paint so that the client still comes. I have been to 5 different tankers 5 times, sometimes the paint runs out very quickly, and sometimes not. And yet, "It is difficult to fix such printers, there are no spare parts for them" - so they said from the service, when they saw my printer, I had to go to another place to replace the green tube.

Answer 1

Xerox/Samsung - forget it - chips, firmware and headache again.
Buy HP - they will "refuel it around the corner" for you, or yourself, if you really want to. Any spare parts for both cartridges and printers are always in stock

Answer 2

Epson monochrome inkjet with "Factory ..." technology - just add ink to the jar when you run out.

Answer 3

Kyocera!
You don't change cartridges, you change the tube that contains the toner. You can simply unscrew the cap from the tube, tighten the hex on some models and fill in your toner.
In order for a non-original cartridge to work, you simply clamp two buttons, waiving the warranty. Anyway, the price of a full tube for some kind of middle office printer and big office level, for 20-60k pages, is more expensive than the printer itself.
Moreover, for each model sane they have repair kits for replacing parts.
We have TASKalf 181, it has a huge toner tube. Once every two months we fill it up, print volumes on it, but the infection is slow. There are also different MFPs FS-3140 and their similarities. Somewhere just a printer that prints smartly, forgot the model. Also, just fill the tube and that's it.
One but. You need to choose the toner wisely, any toner from "cactus" and "universal" will not work. Quocera needs a special toner, they are sold, a little more expensive than regular toner.

Answer 4

And I think it's better and easier to refill a Xerox printer, it's easier to use. But this is only for knowledgeable people who do not fumble in this, it is better not to get involved, in this case it is better to take it to www.admis.ru/catalog/zapravka_Xerox , they will do everything quickly and inexpensively! Moreover, there is an option to call the master at home.