Which A3 color laser printer to choose for design?

Question

AutoCAD

Good afternoon.
We need an A3 laser printer for printing diagrams and graphs - design department.
They used the inkjet for a long time, after his death they took the Epson T1100 inkjet, unfortunately, it turned out to be very impractical, often breaking, the CISS was constantly drying up. As a result, the engineering department refused it, and now they are asking for a laser one.
If anyone has experience in buying an A3 color laser printer, please tell me which one you chose and why. Or I ask you to advise which one to pay attention to. Print volumes - up to about 1000 color A3 pages per month.
An Ethernet port is a plus.

Answer 1

We use TASKalfa 250ci . In general, everything is fine, if there is a domain, then there will be no problems with scans at all.
The printing is of high quality, we print up to 2k pages on A3 per month, various schemes and maps are generally quite decent, if the paper is thick, then it generally comes out great. Sometimes the truth is a bit vague, but on the whole it's very good. Of the minuses, only the price and a long warm-up when printing pictures (in high resolution it can even reach 30 seconds).

Answer 2

1. If there are no problems with the SC, then the most profitable option is Konica Minolta. We don’t have SC KM on the periphery, so the choice fell on Kyocery, there are no problems when using original consumables. From color in use 4550 and S8500.