What can be in the printer and how to solve the problem?

Question

Epson

I didn’t print on the printer for a long time, everything in it dried up (there was no more paint in it), I cleaned the nozzle through the utility, all the colors were printed but not black. Epson t50 printer.

Answer 1

You need a reseter.
Ink and not paint and dried up in nozzles.
Take a syringe, washing liquid, turn on the printer while the head runs back and forth when turned on, pull the wire out of the socket. Then you manually drive the carriage to the very right edge, but so that you can put a syringe on the fitting with black ink. You collect flushing liquid into the syringe, put it on the fitting instead of the ink cartridge, and with a little effort begin to push it through. After a while everything should be ok. Well, do not flood everything around.

Answer 2

It is better not to indulge in a syringe for now - this is a way for more serious blockages and it can get worse if there is no experience. Better take PZK and fill them with cleaning fluid. 3-5 cleanings on liquid with pauses of half an hour should solve the problem. The T50 is water-based ink, it is easy to recover from downtime. Here are all the ways to flush .