Answer the question
In order to leave comments, you need to log in
VPN channel between two Mikrotiks - how to increase the speed of the channel?
Actually between two budget Mikrotik L2TP / IPsec channel. We noticed that the vpn-channel at 100Mbps of the Internet does not rise above 20Mbps.
After reading the Mikrotik forum, it became clear that there are two problems here: CPU load and, oddly enough, the problem of the software of the routers themselves (for 2016/2017). on both devices. A small increase was given by the change of encryption, but still slowly. We decided to switch from budget devices to their more or less multi-core "enterprise".
Question: Is there any live experience/practice on this subject? I would not want to spend money - remove the processor ceiling and rest against the software. Thank you!
Answer the question
In order to leave comments, you need to log in
hEX will gladly digest up to 500mbit/s of an encrypted channel. If you need wifi, then look towards hap ac2. Of the rack solutions, the first one with support for rb3011 hardware encryption with new firmware.
Choose a model with hardware encryption and start living.
After reading the Mikrotik forum, it became clear that there are two problems: CPU load and, oddly enough, the problem of the software of the routers themselvesCompare the hardware capabilities of your microt with similar declared capabilities: huawei, ubiks. Make a conclusion.
Didn't find what you were looking for?
Ask your questionAsk a Question
731 491 924 answers to any question