Answer the question
In order to leave comments, you need to log in
Transistor as a key?
Hello,
there is a task to give 3.3 volts per leg of esp8266 (reset) with a foot of MK
which at 5v
can tell you which transistor to power the leg of 8266 so that 5v goes to the base of the transistor
or just make a divider from a pair of resistors .. just resistor values can jump and esp8266 will burn out if exceeded 3.3 in and this is completely inappropriate
Answer the question
In order to leave comments, you need to log in
A chain / divider of two series-connected resistors of the same rating is placed on the MK leg (connected to the "ground", the resistor ratings are about 4.7 kOhm - 10 kOhm). The connection point of the resistors (5 V /2) is connected to the base of the "digital" transistor PDTC123 (transistor + resistors in one package). The collector through a resistor (4.7 kOhm) is connected to 3.3 V, and directly to the "reset" pin. Just remember that the transistor works like an inverter: on the leg MK 0, on "reset" 1.
Didn't find what you were looking for?
Ask your questionAsk a Question
731 491 924 answers to any question