syslog-ng logs are not sent, what am I doing wrong?

Question

linux

Colleagues, help solve the problem. I set up a centralized collection of logs on the server using syslog-ng.
I don't understand what I'm doing wrong, point me in the right direction to solve the problem.
Config on the server:
/etc/syslog-ng/syslog-ng.conf

@version:3.21
@include "scl.conf"

# syslog-ng configuration file.
#
# This should behave pretty much like the original syslog on RedHat. But
# it could be configured a lot smarter.
#
# See syslog-ng(8) and syslog-ng.conf(5) for more information.
#
# Note: it also sources additional configuration files (*.conf)
#       located in /etc/syslog-ng/conf.d/

options {
    flush_lines (0);
    time_reopen (10);
    log_fifo_size (1000);
    chain_hostnames (off);
    use_dns (no);
    use_fqdn (no);
    create_dirs (no);
    keep_hostname (yes);
};

source s_sys {
    system();
    internal();
#udp(ip(0.0.0.0) port(514));
};

source net {
 udp(ip(0.0.0.0) port(514));
};

destination d_cons { file("/dev/console"); };
destination d_mesg { file("/var/log/messages"); };
destination d_auth { file("/var/log/secure"); };
destination d_mail { file("/var/log/maillog" flush_lines(10)); };
destination d_spol { file("/var/log/spooler"); };
destination d_boot { file("/var/log/boot.log"); };
destination d_cron { file("/var/log/cron"); };
destination d_kern { file("/var/log/kern"); };
destination d_mlal { usertty("*"); };



filter f_kernel     { facility(kern); };
filter f_default    { level(info..emerg) and
                        not (facility(mail)
                        or facility(authpriv) 
                        or facility(cron)); };
filter f_auth       { facility(authpriv); };
filter f_mail       { facility(mail); };
filter f_emergency  { level(emerg); };
filter f_news       { facility(uucp) or
                        (facility(news) 
                        and level(crit..emerg)); };
filter f_boot   { facility(local7); };
filter f_cron   { facility(cron); };

#log { source(s_sys); filter(f_kernel); destination(d_cons); };
log { source(s_sys); filter(f_kernel); destination(d_kern); };
log { source(s_sys); filter(f_default); destination(d_mesg); };
log { source(s_sys); filter(f_auth); destination(d_auth); };
log { source(s_sys); filter(f_mail); destination(d_mail); };
log { source(s_sys); filter(f_emergency); destination(d_mlal); };
log { source(s_sys); filter(f_news); destination(d_spol); };
log { source(s_sys); filter(f_boot); destination(d_boot); };
log { source(s_sys); filter(f_cron); destination(d_cron); };

# Source additional configuration files (.conf extension only)
@include "/etc/syslog-ng/conf.d/*.conf"


# vim:ft=syslog-ng:ai:si:ts=4:sw=4:et:

destination d_Asterisk { file("/var/log/remote-log/Asterisk.log"); };
filter f_Asterisk { netmask("10.10.10.100/255.255.255.255"); };
log { source(net); filter(f_Asterisk); destination(d_Asterisk); };


destination d_MK-10.10.10.1 { file("/var/log/remote-log/MK10.10.10.1.log"); };
filter f_MK-10.10.10.1 { netmask("10.10.10.1/255.255.255.255"); };
log { source(net); filter(f_MK-10.10.10.1); destination(d_MK-10.10.10.1); };

netstat -tulnp | grep syslog

udp        0      0 0.0.0.0:514             0.0.0.0:*                           1903/syslog-ng

Config on the client: The regular rsyslog
is actually installed there made 2 settings in /etc/rsyslog.conf and /etc/systemd/journald.conf : In /etc/rsyslog.conf added *.* @@10.10.10.30:514 at the end of the file (tried *.* @10.10.10.30 and @10.10.10.30:514 options)

# rsyslog configuration file

# For more information see /usr/share/doc/rsyslog-*/rsyslog_conf.html
# If you experience problems, see http://www.rsyslog.com/doc/troubleshoot.html

#### MODULES ####

# The imjournal module bellow is now used as a message source instead of imuxsock.
$ModLoad imuxsock # provides support for local system logging (e.g. via logger command)
$ModLoad imjournal # provides access to the systemd journal
#$ModLoad imklog # reads kernel messages (the same are read from journald)
#$ModLoad immark  # provides --MARK-- message capability

# Provides UDP syslog reception
#$ModLoad imudp
#$UDPServerRun 514

# Provides TCP syslog reception
#$ModLoad imtcp
#$InputTCPServerRun 514


#### GLOBAL DIRECTIVES ####

# Where to place auxiliary files
$WorkDirectory /var/lib/rsyslog

# Use default timestamp format
$ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat

# File syncing capability is disabled by default. This feature is usually not required,
# not useful and an extreme performance hit
#$ActionFileEnableSync on

# Include all config files in /etc/rsyslog.d/
$IncludeConfig /etc/rsyslog.d/*.conf

# Turn off message reception via local log socket;
# local messages are retrieved through imjournal now.
$OmitLocalLogging on

# File to store the position in the journal
$IMJournalStateFile imjournal.state


#### RULES ####

# Log all kernel messages to the console.
# Logging much else clutters up the screen.
#kern.*                                                 /dev/console

# Log anything (except mail) of level info or higher.
# Don't log private authentication messages!
*.info;mail.none;authpriv.none;cron.none                /var/log/messages

# The authpriv file has restricted access.
authpriv.*                                              /var/log/secure

# Log all the mail messages in one place.
mail.*                                                  -/var/log/maillog


# Log cron stuff
cron.*                                                  /var/log/cron

# Everybody gets emergency messages
*.emerg                                                 :omusrmsg:*

# Save news errors of level crit and higher in a special file.
uucp,news.crit                                          /var/log/spooler

# Save boot messages also to boot.log
local7.*                                                /var/log/boot.log


# ### begin forwarding rule ###
# The statement between the begin ... end define a SINGLE forwarding
# rule. They belong together, do NOT split them. If you create multiple
# forwarding rules, duplicate the whole block!
# Remote Logging (we use TCP for reliable delivery)
#
# An on-disk queue is created for this action. If the remote host is
# down, messages are spooled to disk and sent when it is up again.
#$ActionQueueFileName fwdRule1 # unique name prefix for spool files
#$ActionQueueMaxDiskSpace 1g   # 1gb space limit (use as much as possible)
#$ActionQueueSaveOnShutdown on # save messages to disk on shutdown
#$ActionQueueType LinkedList   # run asynchronously
#$ActionResumeRetryCount -1    # infinite retries if host is down
# remote host is: name/ip:port, e.g. 192.168.0.1:514, port optional
#*.* @@remote-host:514
# ### end of the forwarding rule ###

*.* @@10.10.10.30:514

Uncommented in /etc/systemd/journald.conf :
ForwardToSyslog=yes

#  This file is part of systemd.
#
#  systemd is free software; you can redistribute it and/or modify it
#  under the terms of the GNU Lesser General Public License as published by
#  the Free Software Foundation; either version 2.1 of the License, or
#  (at your option) any later version.
#
# Entries in this file show the compile time defaults.
# You can change settings by editing this file.
# Defaults can be restored by simply deleting this file.
#
# See journald.conf(5) for details.

[Journal]
#Storage=auto
#Compress=yes
#Seal=yes
#SplitMode=uid
#SyncIntervalSec=5m
#RateLimitInterval=30s
#RateLimitBurst=1000
#SystemMaxUse=
#SystemKeepFree=
#SystemMaxFileSize=
#RuntimeMaxUse=
#RuntimeKeepFree=
#RuntimeMaxFileSize=
#MaxRetentionSec=
#MaxFileSec=1month
ForwardToSyslog=yes
#ForwardToKMsg=no
#ForwardToConsole=no
#ForwardToWall=yes
#TTYPath=/dev/console
#MaxLevelStore=debug
#MaxLevelSyslog=debug
#MaxLevelKMsg=notice
#MaxLevelConsole=info
#MaxLevelWall=emerg
#LineMax=48K

The most interesting thing is that from the Centos7 10.10.10.100 client server, the logs do not pour in and the file is not created, but from Mikrotik 10.10.10.1 everything comes fine and the /var/log/remote-log/MK10.10.10.1.log file is created and written to it log.
What am I doing wrong? Where to look?

Answer 1

# Remote Logging (we use TCP for reliable delivery)

- in the config on client.
Try to open on TCP server too.