Recommend hardware for Mac OS X 10.6.5

Question

Iron

Hello Habra community!

I want to upgrade my car and I plan to assemble an inexpensive piece of iron with a poppy on board.

Something like this came to mind:
Core i3-550 / P55 / 4G 1333MHz / nVidia 9800GT 1Gb / ATX 550W ~ 20000 rubles.

Mostly I work with code, sound, raster graphics and sometimes with flash. I plan to master the SDK. In principle, I figured out the software and now the question arose on the hardware.

Will the normal operation of Mac OS X 10.6.5 work on this hardware?
Who faced similar, tell me how to be?!

Answer 1

Very good configuration! I do not advise you to fool around with assemblies, which usually put a bunch of junk drivers you don’t need into the system. If you take a motherboard from Gigabyte to P55, then you can easily install Mac OS X to yourself from the original retail image. Indeed, the best loader for these purposes is iBoot from tonymacx86 (see the link above), at the same time, a large database of DSDT tables has been collected on the same portal (http://www.tonymacx86.com/dsdt.php). Please note that you will then definitely need to put the DSDT file in the folder with the bootloader in order for the power management to work normally and devices like a video and audio card to start up without problems.
PS I myself have a hackintosh on the GA-P55M-UD2, absolutely everything works, including sleep with hibernation.

Answer 2

MacOS itself will pull (it will pull with weaker hardware) - the main thing is the assembly that you will install to support cupcakes on these pieces of iron (it will be a hackintosh)

Answer 3

 tonymacx86 to help you.

Answer 4

You can buy here, so that without hemorrhoids:
bizon-pc.com/ru/home2.html

Answer 5

Makos not on a Mac? Am I the only one who thinks this is crazy?